What Are the Specs for the Lippert 2 Inch Trailer Hitch Receiver LC730647

Updated 09/18/2019 | Published 09/16/2019

Products Featured in This Question

Lippert 2" Trailer Hitch Receiver for Campers and Trailers - 72" Width

(13)

$450.34

Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide

(576)

$461.67

Curt RV Bumper 2" Trailer Hitch Receiver

(824)

$131.50

Question:

Could I get a spec sheet for this LC730647 product ? Something that has specific information?

asked by: Dave T

Expert Reply:

The Lippert 2" Trailer Hitch Receiver part # LC730647 is specific to Vanleigh 5th Wheel Trailers. If you take a look at the attached photo you will see that there are tabs on this trailer that sit below the frame and the trailer hitch attaches to these. These two tabs are spaced 72" apart so if this is what you have then the Lippert 2" Trailer Hitch Receiver will work but I don't have any sort of spec sheet on this as it is a custom fit trailer hitch.

If you don't have a Vanleigh 5th Wheel Trailer then your best option is to use the Adjustable Width Trailer Hitch Receiver part # 13703. This trailer hitch is a universal fit and works with pretty much any trailer. I also have much more info on this hitch as it is not a custom fit option like the above. Please note, there are very very few trailers with bolt-on hitch options so more than likely you are going to end up using something like this if you want to install a frame mount trailer hitch.

If you don't want to go through the trouble of installing a frame mounted trailer hitch you can use the Curt RV Bumper Trailer Hitch Receiver part # E-100 so long as you have a rear 4" x 4" bumper.

expert reply by: Conner L