Correct Motor For Ventline V2265 Bathroom Fan

Question

Question:

My fan in my bathroom is V2265. I read # BCD0390-00 is the replacement but my bath fan doesnt have a plug in connector on it. Can I cut the connector off? I also read that the motor from my range hood PC41 also works on my bath fan. Is that true too?

asked by: Bobby

0

Expert Reply:

Some versions of the Ventline fan V2265 have the plug that part # BCD0390-00 connects right into. Not all of them do and you can cut the connector off and hardwire it in. Or we also carry part # BCD0390-01 and hardwire it. The motors are the same.

You read correct that your PC41 hood uses the same motor. As well as the V2128 Ventadome, and hoods PH41, PD41, C1245, and C1246.

expert reply by: Charles S

0

Answer 1

It looks like that bracket the motor is installed on has the instructions "squeeze here to remove/install" so you probably want to try doing that and lifting or shifting the bracket around to see if it moves. Your fan will need to be…

view full answer...

Answer 2

The correct replacement motor for your Ventline V2265 is the Replacement 110-Volt AC Fan Motor for Ventline Ventadome Roof Vents #BCD0390-01. The correct replacement fan blade is the part #BVA0312-00 that you referenced.

view full answer...

Answer 3

We have just what you are looking for. The replacement motor for your V2265 fan is part #BCD0390-01. The fan blades are at times difficult to remove from the old fan so if you need to replace that as well you can use part #BVA0312-00.

view full answer...

Answer 4

Since your Ventline V2265 model fan assembly features the plug-in port for the motor, the correct replacement is indeed the part #BCD0390-00. This is a direct replacement and it will plug right in just like your existing unit. Unfortunately we…

view full answer...

Answer 5

I spoke with my contact at Ventline and he stated that the correct replacement motor for your model V2045 Bathroom Vent will be the Replacement Motor #BCD0390-00. This will include one motor assembly for your existing vent fan.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You can replace the motor in your Ventline V2045 exhaust fan with the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 you were looking at. The fan blade replacement is #BVA0312-00 and then the replacement lens is #VC0133-00. These are the…

view full answer...