bing tracking image
Customer Service My Orders
Q & A Icon

Bolt and Bolt Hole Dimensions on the Bulldog Round Snap-Ring Swivel Jack  

Updated 03/12/2012 | Published 03/10/2012

Question:

For Bulldog p/n BD151443, your staff provided a picture with the mounting hole spacing. I wanted to confirm that those are center-to-center measurements? Could I get the measurement between the holes? And what is the bolt size diameter which is supplied with this jack? Thank you very much!

0

Expert Reply:

The image you referenced from our question and answer section does provide the dimensions from bolt hole center to bolt hole center. I went out to the warehouse and took additional measurements of the Bulldog Round, Snap-Ring Swivel Jack, # BD151443, for you.

The dimensions between the inner edges of the bolts holes on this jack are 5 inches by either 3-15/16 inches or 2-15/16 inches. The diameter of the bolts used for this jack are about 11/32 of an inch. I have included an additional image showing these dimensions

This jack fits up to 3 inch by 4 inch tongues. This jack does not include a footplate or wheel, but I would recommend the Bulldog Detachable Footplate, # BD018564. We also offer the Bulldog Removable Wheel, # BD500245, but a wheel will reduce the overall capacity of this jack to 1,200 lbs.

expert reply by:
0
John H
click to enlarge
click to enlarge
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>