bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Enclosed Trailer
  4. Utility Trailer
  5. 1001 - 2000 lbs
  6. Manual Jack
Round Snap Ring Swivel Trailer Jack w/ Footplate - Topwind - 15-1/4" Lift - 2,000 lbs - Weld
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
etrailer

Round Snap Ring Swivel Trailer Jack w/ Footplate - Topwind - 15-1/4" Lift - 2,000 lbs - Weld

Part Number: TJB-2002-B
In Stock
$60.58
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Rust-resistant jack has a retracted height of 16" and an extended height of 31-1/4". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use. Great Prices for the best trailer jack from etrailer. Round Snap Ring Swivel Trailer Jack w/ Footplate - Topwind - 15-1/4" Lift - 2,000 lbs - Weld part number TJB-2002-B can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (800)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - TJB-2002-B

Highlights

  • 2,000-Lb Lift Strength: Handles heavy trailer tongues with 15-1/4" of smooth lift.
  • Quick Swivel Storage: Spring-loaded pull pin lets you swing jack up when you’re ready to roll.
  • Stable on Soft Ground: Welded 7-1/2" x 3-3/4" footplate spreads weight to keep trailers steady.
  • Built to Last: Clear zinc and black powder coat finish resist rust through seasons of use.
  • Smooth Cranking: Topwind handle with red claw grip turns comfortably under load.
  • Easy Maintenance: Grease zerk makes lubrication simple for lasting, quiet operation.

Features to know about

Smooth Trailer Setup: 15-1/4" Lift Handles the Heavy Lifting

No more wrestling with blocks or struggling to line things up. This swivel jack gives you a solid 15-1/4" of lift, making it easy to raise or lower your trailer for quick hookups or leveling. With a 2,000 lb lift capacity and 3,000 lb support capacity, it’s built for strength and control. The topwind handle has a red claw grip that feels comfortable in your hand and cranks smoothly under load. Whether you’re setting up equipment or parking a trailer, it moves easily and holds steady every time.

Built for Real Work: Heavy Steel with Dual Corrosion Protection

Rain, mud, and road salt don’t stand a chance. The outer tube’s black powder coat keeps rust away, while the inner tube’s clear zinc finish adds another layer of defense. Reviewers noticed the solid build and how it still looks and works like new after plenty of use. The welded-on footplate spreads the weight to keep it from sinking in soft ground, so you can park or store your trailer worry-free.

Quick Swivel Action: Snap-Ring Design for Easy Positioning

When it’s time to move, the retaining-ring swivel lets you swing the jack up for travel or down for use in seconds. The deep-seated snap ring keeps it tight and steady even under side load, and the 1/2" spring-loaded pull pin clicks securely into place. It’s a simple, sturdy setup that saves time and keeps your trailer ready to roll.

Fast Fitment: Weld-On Bracket and Grease Zerk Keep You Rolling

The included weld-on bracket makes installation straightforward, whether you’re outfitting new equipment or replacing a worn-out jack. Once it’s on, the built-in grease zerk lets you lubricate the mechanism quickly, so cranking stays smooth and consistent. The 2-1/4" outer tube and 2" inner tube fit snugly in the bracket, and the handle’s 7-1/2" radius gives solid leverage without taking up space. This jack is ready for years of dependable use wherever you need it.

Specs

Height and Lift

  • Bracket height (from bottom of foot to center of mounting plate): 16" Retracted
  • Bracket height (from bottom of foot to center of mounting plate): 31-1/4" Extended
  • Lift: 15-1/4"

Dimensions

  • Outer tube diameter: 2-1/4"
  • Inner tube diameter: 2"
  • Footplate dimensions: 7-1/2" long x 3-3/4" wide
  • Mounting bracket dimensions: 5" long x 4-1/4" wide
  • Handle radius: 7-1/2"

Technical dimension diagram of the etrailer Round Snap Ring Swivel Jack TJB-2002-B showing measurements such as bracket height, travel length, tube diameters, footplate size, and handle radius for accurate trailer fitment.

  • Bracket height (from bottom of foot to center of mounting plate): 16" Retracted, 31-1/4" Extended

Capacity

  • Lift capacity: 2,000 lbs
  • Support capacity: 3,000 lbs

Warranty

  • Warranty: 1-Year warranty

TJB-2002-B Ram Round Snap Ring Swivel Jack w Footplate - Weld On - Black - Top Wind - 15-1/4" Travel - 2K

Similar to BD151421 and BD151464 Bulldog Swivel Trailer Jacks (Except with Powder Coat Finish); Similar to PS1401040303 Pro Series Swivel Trailer Jack





Customer Satisfaction Score:

Ratings & Reviews

4.8

800 reviews
5 Stars
(695)
4 Stars
(72)
3 Stars
(11)
2 Stars
(9)
1 Star
(13)
Review Sort Icon
by:
Hard to find a good jack for my custom inherited trailer. Old one was too short and wouldn’t crank up or down. This one was perfect replacement.

Came with a welding bracket but I won’t use that since going on an existing trailer. Jack works great and just snapped right on. The pull release is solid and engages really well. I’m happy.
by:
Exactly what I needed for our Message board trailers. Great Quality and the Snap Ring is thicker than other brands. I cut the old bracket off and welded on the new one.
by:
E Trailer was only place to purchase a jack for a 25 ft. Unit. Thank you so much. Nobody else has a jack this big.
by:
This is the wrong part; not even close to a scissor jack. I called back and did a re order of the correct part and was told it would be delivered on July 3rd… The email for the correct states delivery of July 7th; I won’t be ate the location on July 7th. You people sure are giving me the run around. This is as bad of service I have ever received from any company.
by:
I received my trailer jack early this afternoon. Within minutes, the jack was installed and was fully operational. Operational within minutes with a weld on fixture? Fair question. Well, thanks to your complete description of the product I was able to order a jack that matched the bracket already welded to the frame of my trailer!
It fit perfectly, although I had to use the old snap ring because the one supplied with the new jack was too thick for the groove on the old bracket. Minor issue. I'm very satisfied with my purchase.
by:
Here is a pic of my 1916 FORD Model T Touring and camper setup
by:
I am using the jack to lift the front of my new John Deere Z930M zero turn lawn mower to replace the blades.
I am fabricating a (hidden) bracket to hold the jack horizontal across the front when not in use.
It will be pivoted down, locked & cranked to safely change the blades. The mower weighs 1300 + lbs & we are only raising the front, so the 2000 lb capacity is over kill. The 15" lift is what I wanted for maximum lift. Very heavily built, I'm very satisfied!!
by:
This is first time needing a new trailer jack, was not sure I could order the correct one, so called on a Saturday, and actual people answer the phone which is a huge bonus these days. They were very nice and helpful to get correct parts, ordered it over the phone, was delivered to us on the following Wednesday. Looks perfect, and I feel was priced very well. Thank You!! A+ A+
by:
Packaged well, shipped fast,jack as described AAAA+++++
by:
e-trailer was fast and prompt in getting the product to me and the jacks worked as they should thanks e-trailer
by:
These jacks are perfect for what we use them for. Message boards and Arrow Boards is what we use them on but are used on many other trailers or equipment that we have.
These Jacks are high quality and more cost effective.
by:
Seems to be a very well made Jack, works great and looks good. Chose standard shipping and received it in 2 days. No complaints here
by:
Product is excellent, etailer’s customer service is poor.
by:
This jack is high quality, unfortunately I ordered the model that was a bit too tall to work for my application. Great jack, otherwise...
by:
I received my order very quickly and was impressed with the quality of the jack for the price !
by:
Great price and etrailer did great at a fast delivery!
by:
Works perfectly! Thanks etrailer!
Marty
by:
Product arrived quickly and was exactly what we ordered. Still working like the day we bought it a year ago.
by:
Works fine
by:
works great
by:
works great
by:
Excellent and strong product.
by:
Good value. Gets the job done and doesn't break the bank.
by:
by:
Great quality and great price. Everything arrived very fast
25
800
true
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Is There an Adapter to Mount the Ultimate Trailer Jack to a Side Mount Bracket on Trailer?
    Hey Mario, thanks for reaching out! Congrats on your new purchase of the Ultimate Trailer Jack # 322-RDJ-2K! There aren't any adapter mounts to make this so it mounts on the bracket you're pointing out in your photo, so if you want a jack to install there, we'll need to get you setup with a whole new jack. For a trailer jack that mounts on the bracket I recommend the Round Snap Ring Swivel Jack w/ Footplate # TJB-2002-B. It has similar specs to the Ultimate Trailer Jack, and it comes...
    view full answer...
  • Diameter of Replacement Snap Ring for etrailer and Ram Branded Snap Ring Swivel Trailer Jack
    The inside diameter of the snap ring that would be used for the # TJB-2002-B is 2 inches, and the outside diameter is 2-1/4 inches. We offer the replacement snap ring for that jack as part # SNP-RING
    view full answer...
  • Replacement Tongue Jack for a Down To Earth 6x10 Utility Trailer
    For your Down To Earth Trailer, I recommend the Round Snap Ring Swivel Jack w/ Footplate part # TJB-2002-B. This jack uses a snap ring swivel bracket with a 2-1/2" outer diameter. It should work with the existing bracket you have on your trailer now but if not it comes with it's own bracket that you can use if the need arises. This jack has a 2,000 lb tongue weight lift capacity with 15-1/4" of travel. It also comes with a footpad for stability. I have attached a review video for you as well.
    view full answer...
  • Jack Handle Replacement Recommendation for RAM 2000 Trailer Jack with Red Handle
    For your Ram 2000 series jack like the part # TJB-2002-B the replacement handle part # TJPB-HD is the correct fit. As long as you see the red handle on your jack this is the correct fit. You would not need to compare dimensions of it.
    view full answer...
  • Dimension to Top of Handle for the Round Snap Ring Swivel Jack # TJB-2002-B
    From the center of the main mounting section of the Round Snap Ring Swivel Jack # TJB-2002-B to the top of the handle part that connects to the jack is about 5-1/2". The handle then dips down about 1-1/4" while the handle grip sits about 2-3/4" higher than that. So if you are referencing where the handle connects to the jack then that is about 5-1/2" but if you are talking about the handle grip then that is about 7" (when you add the 5-1/2" and the 2-3/4" but subtract the 1-1/4"). Attached...
    view full answer...
    Image 1 for
  • Why Does My Snap Ring Trailer Jack Fit Loose in the Mounting Bracket?
    Hey Paul, thanks for reaching out. The standard snap ring size is 2-1/2", and all of the snap ring jacks we offer use this same standard size mount. If your jack feels loose in the mount, that makes me think your mount may be worn down or damaged and is in need of replacement. I do see you ordered the Round Snap Ring Swivel Trailer Jack # TJB-2002-B from us a few weeks ago. If I were you, I'd take the mount that came with that jack and use it to replace your old one. What trailer are...
    view full answer...
  • Topwind Side Mounted Trailer Jack that Has Wheel Caster
    The etrailer jack part # TJB-2002-B does not have a wheel caster replacement for the foot of it. The most similar jack we offer that has a wheel caster on the bottom of it instead of a foot is the Dutton Lainson part # DL24MR.
    view full answer...
  • Black Topwind Trailer Jack Recommendation
    We have the very similar etrailer.com Round Snap Ring Swivel Jack w/ Footplate # TJB-2002-B which is black. It has the same topwind design, 2,000 lb capacity, and right at 15 inches of travel as the Pro Series part # PS1401040303 that you referenced. I attached a review video for this jack for you to check out as well.
    view full answer...

Do you have a question about this Trailer Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Alex H
Updated by:
Alex H
Employee Amanda M
Written by:
Amanda M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.