Recommended Steps To Help Get Inside Box Truck 50+ Inches Off the Ground

Question

Question:

Hello, I need a stairwith a height of 140/150 cm. Can I order a stair with a larger number of steps? Thanks in advance

asked by: Giorgio C

0

Expert Reply:

I have the perfect option for your truck, the TorkLift GlowStep Camper Scissor Steps part # TLA7836 which can extended to accommodate a threshold height of 58". This will actually be the tallest step we offer and it should be fairly easy to mount just below the door with the included mounting bracket.

expert reply by: Conner L

0

click to enlarge

Answer 1

Thank you for all the information; that allowed me to do quite a bit of research. To answer your questions in regard to the Lippert SolidStep, there isn't a 4-step version of #LC698799, which is a triple step that fits 24 inch wide door frames.…

view full answer...

Answer 2

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

view full answer...

Answer 3

The TorkLift GlowStep Revolution Scissor Steps #TLA8006 are designed to replace the fold out style steps most commonly found on 5th wheel type trailers. For your BigFoot truck camper you would want a system like the TorkLift GlowStep Stow N' Go…

view full answer...

Answer 4

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7836 have a max extension of 54" (see attached) but when it comes to minimum extension there really isn't a specific number - you just need to make sure the landing gear…

view full answer...

Answer 5

I have a great solution for you to get stairs for your 50-inch entry platform. Unfortunately, the Victory Step Manual Fold-Down Steps for RV and Toy Haulers #LC726895 will only work with entryways that are 30-45 inches high. Victory Step models sadly…

view full answer...

Answer 6

Since your doorway height is 54 inches yes the TorkLift GlowStep Stow N' Go Scissor Steps #TLA7836 would work and would be fine with the gravel on the ground.

view full answer...

Answer 7

The TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7836 can be used in pretty much any application Where there is sufficient space and strength to mount the bracket. I am not aware of any applications on a semi but so long as you have space…

view full answer...

Answer 8

The total weight of the TorkLift GlowStep Stow N' Go Scissor Steps #TLA7836 that you referenced is 47 lbs.

view full answer...

Answer 9

Hey Lisa, that depends on the entry height of your Forest River which you'll have to measure as we don't have a way to look that up. 23-1/2" - 34-1/2" #TLA7843, #TLA7833 31" - 42" #TLA7844, #TLA7834 38-1/2" - 50"…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Steps To Help Get Inside Box Truck 50+ Inches Off the Ground

Product Page this Question was Asked From

Continue Researching