Will the SumoSprings Solo Custom Helper Springs SSF-204-47 Fit a 2001 Dodge Dakota 2WD

Question

Question:

Will this fit my 2001 Dodge Dakota 4X2 truck? The pictures show that this uses a round base mount. My truck has an oval base mount for the stock bump stops.

asked by: Jon A

0

Expert Reply:

I have attached a photo that shows the OE bump stop that the SumoSprings Solo Custom Helper Springs part # SSF-204-47 are designed to replace. If this is what your OE bump stops look like then the SumoSprings Solo Custom Helper Springs will fit and work well for you. These are designed to replace the front upper bump stop which is attached to the frame.

expert reply by: Conner L

0

click to enlarge

Answer 1

Yes, we do have SuperSprings SumoSprings for your 2008 Chevy Express 3500 cargo van. If it is a 2-wheel drive model you can use #SSR-205-47. There are no SumoSpring options for 4x4 models. If you do have a 4x4 then you can use Timbren springs…

view full answer...

Answer 2

When you're adjusting a weight distribution system, you're looking for the system to return the front ride height as close as possible to where it was when unloaded, ideally within an inch or so. If you're at or near that point,…

view full answer...

Answer 3

In this application, the springs will be handling the downward force or tongue weight applied to the trailer hitch from the trailer. Since a trailer's tongue weight usually runs 10-15% of the trailer weight, at most that trailer is applying 750…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 8

Hey Brendan! What you have now is an Airpax Dimensions WIN-12X20B3R1T inverter/charger with a built-in transfer switch. For a comparable all-in-one option we have the Victron MultiPlus #VN69ZR. This combines all three functions in a single unit and…

view full answer...

Answer 9

For your 2017 Chevrolet Express Van we do have brake controller solutions but the vehicle does not have a port under the dash for installing a brake controller. Instead it has wiring available under the dash or sometimes the driver side floor mat up…

view full answer...

Answer 10

To install a 7-blade in your 2017 Chevy Express van, presumably for a brake controller, you are going to need to do some hard wiring. For a brake controller the first thing you'll need is to add 4-way #118392 and I've added a link to a video…

view full answer...

Will the SumoSprings Solo Custom Helper Springs SSF-204-47 Fit a 2001 Dodge Dakota 2WD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching