Is 12V Power Connection Required for Tekonsha T-One 4-Pole Wiring Harness 118718 to Function
Updated 07/24/2019 | Published 07/22/2019
Question:
I plan on using this to power a few LEDs and currently run LEDs in all of the bulbs on my 2019 CX-3. I understand its powered so as not to overload the factory wiringinch but given that information it should have more than enough capacity to run two more LED bulbs. Is it necessary to run power to this unit, or will it run fine un-powered?
asked by: Dan S
Expert Reply:
Yes, the Tekonsha T-One 4-Pole Wiring Harness # 118718 will work fine to power LED lights on a trailer or accessory carrier used with your 2019 Mazda CX-3 but it does require the 12V power wire connection in order to function.
The plug-in connectors will take in the car's lighting signals which essentially serve as switches to tell the converter to send lighting power out to the 4-pole. The actual current to operate the lights comes from the power wire that you route up to the battery; the vehicle wiring just serves to tell the converter what to do. A powered harness like this is the best way to protect your vehicle's internal wiring from risk of damage from a short or overload.
You can refer to the linked article for help with the routing of that power wire. Please note that an accessory 12V power outlet (now often found in the rear of vehicles) is not suitable for powering the harness since it is current-limited. The direct battery connection is required.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: wiring harness
- Search Results: trailer wiring harness
- Search Results: trailer wiring
- Q&A: Recommended Trailer Wiring Harness for 2018 Mazda 3 with LED Lights
- Q&A: Why Does The Tekonsha T-One # 118405 Require Running A Wire To The Battery?
- Shop: Brake Controller
- Shop: Base Plate for Tow Bar
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Suspension Enhancement
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: base plate for tow bar
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
on Custom Fit Vehicle Wiring
