How Far Does Grease Seal Install into Dexter Trailer Hub
Updated 07/22/2019 | Published 07/18/2019
Question:
How far does the rear seal get pressed in . The old one was flush with the hub
asked by: Joe
0
Expert Reply:
When installing trailer hub grease seals you want to install them flush with the surface of the hub.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU44FR
- Search Results: trailer hubs and drums
- Search Results: ez lube axle
- Search Results: trailer leaf springs
- Search Results: bearing l44649 trailer bearings races seals caps
- Search Results: bearing seal
- Search Results: trailer bearings races seals caps
- Search Results: dexter ez
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub for a Dexter D20 Axle
- Video: Trailer Axle with Idler Hubs Spec Review
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Q&A: Troubleshooting Hub and Spindle Not Fitting Together after Replacing Spindle on a Utility Trailer
- Q&A: Does the Rubber Cap on a Dust Cover Have to be Removed to Fill EZ Lube Trailer Axles with Grease
- Q&A: Brake Hub/Drum Is Stuck And Cannot Be Removed From Spindle - What Can I Do?
- Q&A: Trailer Hub Wont Slide Onto the Spindle of a Timbren Axle-Less System
- Q&A: How Much Grease to Pump into Trailer Hub Using EZ Lube Fitting
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Shop: Dexter Bearing Kit for 1-1/16" BTR Spindle
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Video: All You Need to Know About the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles Feature Review
- Video: A Closer Look at the Dexter Electric Trailer Brake Assembly