Ladder For Lance Truck Camper that Has Hinge and Can Fold

Question

Question:

I have a 2003 Lance 1030 truck camper the needs a roof ladder that Folds the lower half

asked by: Tom C

0

Expert Reply:

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson # LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture I attached.

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

We have the SafeStep Vinyl Barrier for TorkLift GlowStep Scissor Steps for Campers, RVs, and Trailers #TLA7602 which be a great solution for what you are looking for. This will block the area between the steps so that your foot can't slip forward…

view full answer...

Answer 3

The yellow wire of the 7-way harness part #H20044 that you referenced goes to the center pin of the 7-way which is an aux circuit that is typically used for reverse lights if present on the trailer. Normally the red wire on a 7-way (RV standard…

view full answer...

Answer 4

The mounting brackets for the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear item #TLA7833 measure 21-1/2" wide x 12-1/2" tall x 8-1/2" deep. The steps will bolt directly to your Lance 2021 1172 Truck Camper with…

view full answer...

Answer 5

Hey Russ, I can't imagine you'd need a taller version of the Lippert On-The-Go than the 12-1/2 foot version part #LC64HD that we offer but you might take a tape measure out there with you and see if that would be tall enough. From what I…

view full answer...

Answer 6

Hey Mark. To replace the side entry door lock on your 2021 Thor Fourwinds 28z, I have two options that may work depending on the size of your door's cutout. To measure your cutout you'll need to remove your door lock and get the height and…

view full answer...

Answer 7

The height of our RV ladders are calculated by measuring from top to bottom. We offer exterior ladders ranging from 84-1/2" to 99-1/2" tall. However, most of them such as the Stromberg Carlson RV Exterior Ladder part #LA-401 are…

view full answer...

Answer 8

Thanks for reaching out Robert, So you're looking for a comfortable portable toilet for your 2024 Ford Transit passenger van that doesn't need to be permanently mounted. I like your choice of the Thetford C223-CS Cassette Toilet #Th62YE.…

view full answer...

Answer 9

Hey Richard welcome back! The Greystone RV Curved Electric Fireplace with Logs item #GR54FR is going to be the closest replacement option I have for your Innoflame RV26D80M-C1. The Greystone item #GR54FR fits a 26" wide x 20-7/8" tall x…

view full answer...

Answer 10

Hey Carl, unfortunately that isn't something that we have, but we do have a bunch of other options that you could use that'd work just as good! If you're open to this, I'd recommend going with the Stromberg Carlson RV Exterior Ladder…

view full answer...

Answer 11

The MORyde pin box RSPB83-1622 is a 16K orbital rotating pin box designed for increased turning clearances with short bed trucks. Although this nice feature is not required for a long bed truck like your 2017 Ram 3500 I recommend keeping it. The…

view full answer...

Ladder For Lance Truck Camper that Has Hinge and Can Fold

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching