Does Curt Front Hitch for 2018 Toyota Tacoma TRD Require Air Dam Trimming

Question

Question:

I have a 2018 Tacoma TRD Off Road Pro pickup truck. With the Curt C31075 front tow hitch, how much of the skid plate will need to be modified?

asked by: Peter S

0

Expert Reply:

I checked with Curt and the Front Hitch for your 2018 Toyota Tacoma TRD # C31075 is a confirmed fit and there are no notes in the install instructions that indicate that the skid plate would need to be removed or modified. The air dam needs to be trimmed but not the skid plate. The only model that would require further modifications that we've seen so far is the TRD Sport models.

expert reply by: Jameson C

0

Answer 1

When installing Curt front mount receiver #C31075 it is just the air dam that will need to be trimmed on the 2016 Toyota Tacoma. I have included a picture that shows where the trimming needs to occur. I have also linked the instructions for you.

view full answer...

Answer 2

Out of the two front mount hitches for your 2019 Toyota Tacoma the Curt Front Mount Trailer Hitch Receiver item #C31075 is the best option for your application. It does require trimming of the front fascia and the skid guard if your model has one.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

Hi Jeff! To be perfectly honest, there is no difference between them. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED72CR comes to us already put together to fit your 2017 Toyota Tacoma, whereas the Redarc Tow-Pro Liberty Brake…

view full answer...

Does Curt Front Hitch for 2018 Toyota Tacoma TRD Require Air Dam Trimming

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching