Ground Clearance for Curt Trailer Hitch Installed on 2019 Toyota RAV4 Hybrid

Question

Question:

I havent purchased my 2019 RAV 4 XSE Hybrid yet, but plan to in the near future. I wanted to find out how much ground clearance there will be after I install the Curt Receiver hitch to my new RAV 4. Thank you

asked by: Scott

0

Expert Reply:

After you install the Curt hitch part # C13416 on your 2019 Toyota RAV4 you'll have right at 10-1/2 inches of ground clearance measured from the bottom of the hitch to the ground.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver #306-X7152 that fits your 2012 Toyota RAV4 uses M12-1.25 x 40mm bolts.

view full answer...

Answer 2

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

view full answer...

Answer 3

You are correct the Ecohitch does not have a compatible fit for the 2019 Toyota RAV4 Adventure at this time. However, the concealed cross tube option Draw-Tite Max-Frame Trailer Hitch Receiver part #DT82QR provided about 12" of clearance on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Ground Clearance for Curt Trailer Hitch Installed on 2019 Toyota RAV4 Hybrid

Featured Help Information

Miscellaneous Media

Continue Researching