4-Pole, 5-Pole and Wishbone Style Trailer Wiring
Updated 06/10/2019 | Published 06/08/2019
Products Featured in This Question
Question:
Trying to wire tail lights on a 4 wire connector from a 5 wire connector
asked by: Ed I
Expert Reply:
There are two types of 5-wire flat trailer wiring harnesses; the wishbone style of 4-pole such as # A35W42B which has 4 pins but that has two separate wires connected to the the running light pin so that you have one wire for each side of the trailer; and the 5-wire 5-pin type like # HM47910 which actually has 5 pins, one being for an additional circuit such as a trailer coupler's electric reverse lockout feature.
The basic lighting on a trailer requires only a 4-pole hookup; this 4-pin wiring has a ground and three circuits: 1) left stop/turn, 2) right stop/turn and 3) running lights. The 4th pin/wire is the ground that support all three of those circuits. You can refer to the linked article on trailer wiring for more details about wiring formats.
If your vehicle and trailer each have different connectors, one a 4-pole and the other a 5-pole, they can still connect. The only thing is that the additional circuit will not be connected. If you want a 4-pole to 5-pole adapter we do offer these such as # 20036 and # 47515. These have an extra wire that connects to the vehicle's reverse light circuit to operate the trailer coupler's electric lockout feature.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: d ring tie downs
- Video: A Closer Look at the etrailer Ratchet Straps with Snap Hooks and Storage Bag
- Video: Review of etrailer Ratchet Straps - Snap Hooks - e32SV
- Video: Checking Out the CE Smith Tie-Down Bracket for Boat Trailers
- Q&A: Grade Bolt to Use When Installing CE Smith Tie-Down Bracket # CE26214G
- Q&A: Is The etrailer Ratchet Strap with Snap Hooks Available in a Length Less Than 20'?
- Shop: Trailer Wiring
- Video: TowSmart 4-Way Flat Connector Rapid Repair Trailer Wiring Kit DIY Installation
- Search Results: wesbar
- Shop: etrailer Ratchet Strap with Snap Hooks - 2" x 20' - 3,333 lbs - Qty 1
- Shop: etrailer Ratchet Straps with Snap Hooks - 2" x 20' - 3,333 lbs - Qty 2
- Shop: Bulldog Winch Cinch Straps - 1" Wide x 18" Long - Qty 4
- Shop: CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
- Shop: etrailer Ratchet Straps with Snap Hooks and Storage Bag - 2" x 20' - 3,333 lbs - Qty 4
- Shop: Erickson Deluxe Axle Strap with D-Rings - 2" Wide x 24" Long - 3,300 lbs
- Shop: etrailer Ratchet Strap w/ Snap Hooks - 2" x 10' - 3,333 lbs - Qty 1
- Video: Review of TowSmart Trailer Wiring - Trailer Connectors - TS92ZR
- Q&A: 4-Way Trailer Connector that has 5 Wires
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Q&A: Troubleshooting Trailer Turn Signal Fuse that Blows When Replaced
- Video: What to Know About the Curt Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: What Size Wire Gauge Do 4 Pole Connectors Use
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
on Custom Fit Vehicle Wiring
