How to Access Rear of Drive RV Stereo # 324-000138 Thats Already Installed

Updated 08/17/2024 | Published 05/07/2019

Question:

We just bought our rv with this DVD1000 radio system. From watching your video It seems the plug in for the am/FM is on the back. How do I access this if my radio is already installed?

asked by: Staci

Helpful Expert Reply:

You are correct that the AM/FM signal input is at the rear of the Drive RV Stereo DVD1000. To gain access to the rear on your stereo that's already mounted you will need to first remove the bottom panel from the front face. I have highlighted this panel in red on the image you sent in of your stereo.

This black plastic panel can simply be pulled/pried away from the main unit. Once it's removed you will have access to the mounting screws that are securing the stereo in place on the wall. Simply remove the screws and you should be able to pull the entire unit out.

expert reply by: Chris R

click to enlarge

Michelle

7/1/2024

I have the same stereo showing in picture from your post showing from Stacie.. I cannot get the am/fm radio to scan, it comes on but not able to scan for a channel. Thank you Michelle

Laury V.

8/15/2024

Where can I find a replacement for my drive dvd1000 remote.

Chris R.

8/16/2024

@LauryV Hey Laury, unfortunately that's not something we're able to carry right now. Your best bet will be to contact Drive (or their parent company Way Interglobal) directly and they should be able to send one out.

Laury V.

8/17/2024

@ChrisR Thank you