How To Determine The Correct Size RV Storage Cover For An RV Air Conditioner Unit

Question

Question:

I need a air conditioner cover for my forrest river micro boost..2024../ 26 foot..whats the part # thanks

asked by: Brewer

0

Expert Reply:

There isn't a guide to tell us what AC unit is on your trailer so you would need to either determine the brand and model number or measure the shroud in order to find the correct storage cover. For example, the Adco RV Air Conditioner Cover # 290-3026 you were looking at is 37" long x 26" wide x 13-1/2" tall and fits the following units:

Coleman Mach 15, Coleman Mach 111 Plus, Coleman Mach 1 Power Saver, and Coleman Mach 111 Power Saver AC units.

If you don't know what model your unit is then you can unscrew the shroud from the base and once removed you'll see a sticker somewhere on the unit that lists the brand, model, and a bunch of other information that we can use to find the correct size cover.

expert reply by: Kevin C

0

Answer 1

Hi Paul, I'd be happy to help you find the right cover for your Coleman air conditioner. The challenge is that Venture RV used several different Coleman rooftop AC models on the Sonic Lite, so I don't want to guess and recommend the wrong…

view full answer...

Answer 2

We have vinyl covers that would fit your Coleman Mach like the Adco RV AC Unit Cover #290-3026 but we do not carry any covers that are canvas.

view full answer...

Answer 3

For an upgrade over the Drive stereo you have now the Jensen Stereo part #JWM60A that you referenced is our best choice. It essentially has all of the same features as the Drive while being a bit more reliable. It's designed for RV in-wall…

view full answer...

Answer 4

You are correct that the AM/FM signal input is at the rear of the Drive RV Stereo DVD1000. To gain access to the rear on your stereo that's already mounted you will need to first remove the bottom panel from the front face. I have highlighted…

view full answer...

Answer 5

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

view full answer...

Answer 6

You should have 3 wires at the rear of your LED light, or from a pigtail like part #A47PB, that plugs into a light like part #STL22RB. The red wire will be connected to your stop/turn circuit on your vehicle. The black wire is spliced into your…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

How To Determine The Correct Size RV Storage Cover For An RV Air Conditioner Unit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching