Recommended Towing Mirrors for a 2019 Ford Ranger

Question

Question:

what mirror extensions would you recommend for a 2019 Ford Ranger used to tow a travel trailer

asked by: Ken

0

Expert Reply:

I recommend using the K-Source Universal Towing Mirrors # KS3891-2 for your 2019 Ford Ranger. We haven't test fit these yet (April 2019) on a 2019 Ranger but these will fit most mirrors that are 4-1/2" to 11-1/2" tall. Since this is a wide variety and we have test fit these to work on other Ford pickups you shouldn't have any issues with your Ranger.

As of right now there are no custom fit options for your 2019 Ranger. I have attached a review video of the K-Source mirrors that you can check out.

expert reply by: Jon G

0

Sharon Z.

1/9/2020

Do theses mirrors scratch the mirrors they attach to?

Jacob H.

1/13/2020

These tow mirrors are designed with rubber pads and rubber straps. When installed correctly, they will not scratch your factory mirrors.

Chance F.

6/22/2020

I have these tow mirrors, and they are woefully inadequate for anything longer than maybe 16-18' they are too small, and they vibrate at speed which makes everything in the mirror hard to see. I'm looking for something that is "custom" which should not be hard to find with a popular truck like the ranger with such a high tow rating.

Chris R.

6/24/2020

I really wish I had a better solution but there just aren't any custom towing mirrors available for your Ford Ranger. The above-mentioned K-Source units are honestly the best option. Make sure the ratcheting straps are completely tight to try and reduce that vibration.

Answer 1

Hi Doug; I'm sorry to say that there are no custom fit towing mirrors for your 2024 Ford Ranger. The only option is to use universal mirrors. I recommend the K-Source Universal Towing Mirrors #KS3891-2. I prefer these over others since they have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 12

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Recommended Towing Mirrors for a 2019 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching