Replacement Mounting Hardware for SportRack Vista XL Cargo Box

Question

Question:

I bought a sport rack vista xl cargo box and it didnt come with anything to mount it. I saw there was a kit for different sport rack boxes, would that work for this one?

asked by: Janah

0

Expert Reply:

We have all of the mounting hardware components available for your SportRack Vista XL Cargo Box # SR7018, but they are not offered in a single kit so you will just need to purchase the individual parts. To mount the box onto your roof rack you will need the following:

4 of the U-Bolt # TH02943
4 of the Plated U-Bolt Bracket # TH03918
4 of the Plat Box Support # TH10378
8 of the Wingnut # TH04877

expert reply by: Chris R

0

Answer 1

To replace the mounting hardware for your SportRack Vista XL Cargo Box #SR7018 will require you to purchase individual components because there is not a hardware kit available. You will need the following: 4 U-Bolts #TH02943 4 Plated U-Bolt Brackets…

view full answer...

Answer 2

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

Answer 3

The bolt to bolt spacing on the Replacement U-Bolt for the Thule Sidekick item #TH02943 is 4". It is 2" deep overall. I have linked a diagram below that will show you these measurements and a couple more. They are different dimensions along…

view full answer...

Answer 4

Your best option is Replacement Key for Thule and SportRack Racks and Carriers #THKEYN2806. Thule makes the SportRack products so this replacement key is the one you would need. In the event that the key won't turn you may just need to lightly…

view full answer...

Answer 5

Hi David, The Thule replacement Vinyl Hole Covers part #10171 are intended to cover unused mounting holes on the bottom of the cargo box shell and should be placed on the outside of the box. Just make sure the surface is dry and clean before using…

view full answer...

Answer 6

It sounds like you need the vinyl hole covers such as #10171. For the key, the picture is not the actual key, just a representative photo. The actual key #THKEYN2860 will have teeth cut on both sides.

view full answer...

Answer 7

The Thule Sidekick Roof Mounted Cargo Carrier Box #TH78GC uses a U-Bolt #TH02943 that is 3-3/16" wide. I have included an image below with the measurements for this U-bolt.

view full answer...

Answer 8

Yes. The SportRack Vista XL Cargo Box - Roof Mount - 18 Cubic Feet #SR7018 comes with U-bolts that will allow you to mount the cargo box to round, square, aero, elliptical, and most factory crossbars.

view full answer...

Answer 9

Your Thule Excursion will need the Replacement Box Plate #TH10378. This is the specific plate listed from Thule. I do see the Plate #TH04998 you found is very similar with both having holes at 4" on center. The difference I see is the one you…

view full answer...

Answer 10

I do have an option for you but the SportRack Aero XL is discontinued and has been for some time so obtaining replacement parts is going to be very hard to come by. That said, we do still have the u-bolts if that's what you need, the Replacement…

view full answer...

Answer 11

It's absolutely possible! The Karrite cargo boxes were manufactured by Thule, so they use Thule replacement keys. The correct replacement for the 2854 key would be part #THKEYN2854.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Mounting Hardware for SportRack Vista XL Cargo Box

Products Featured in This Question

Continue Researching