Landing Gear Replacement for 2007 Keystone Cougar 29BHS
Updated 07/13/2020 | Published 03/28/2019
Products Featured in This Question
Question:
I need to replace my landing gear. On my 2007 cougar 29BHS. The existing welded brackets have a measured distance of 11 1/4 inches. My existing Landing gear doesnt even look like it has welded stops.
asked by: Keith
Helpful Expert Reply:
If your brackets are 2" tall then you most likely have the standard weld stop measurements of 15-1/2" inside to inside (see attached photo). With this being the case I recommend going with the Landing Gear Set # RVLG-8000 which has a weight rating of 8,000 lbs and offers 20-1/2" of travel. Since you have an older trailer I bet the weld stops have just been wedged in the mounting brackets which is why you are having a hard time finding them.
This set comes with the gearbox and you can either operate them manually using the hand crank # RVLG-HDL or electronically with the 12V DC motor # LC142178 and switch # LG-145236.
Product Page this Question was Asked From
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 7001 - 8000 lbs
- Manual Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: landing legs
- Shop: Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs
- Shop: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies
- Q&A: Which Side Is The Lead Leg For The Landing Gear On 2008 Montana Trailer
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Shop: Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs
- Q&A: Replacement Landing Gear for 2010 Keystone Fuzion FZ322 Fifth Wheel Trailer
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Video: All You Need to Know About the Landing Gear Set
- Video: Mount: Jensen Mechless RV Stereo on a 2007 Forest River Flagstaff Super Lite Travel Trailer
- Search Results: front jacks
- Search Results: rv stereo
- Search Results: front landing gear
- Search Results: 5th wheel front landing gear
- Shop: Jensen Mechless RV Stereo - Double DIN - Bluetooth, USB - 36W - 3 Zones - 12V
- Video: In-Depth Review of the Landing Gear Set
- Q&A: Inexpensive Landing Gear For Keystone 5th Wheel Trailer
- Q&A: Landing Gear Follow Leg Replacement for 2008 Keystone Fusion
- Q&A: Will etrailer Landing Gear RVLG-8HDL Fit 2003 Keystone Cougar 276EFS
- Q&A: Dimensions of etrailer Brand RVLG-8HDL and RVLG-8000 Replacement 5th Wheel Landing Gear
- Search Results: landing gear replacement
- Shop: Replacement Manual Crank Handle for Lippert 5th Wheel RV Landing Gear
- Q&A: Replacement Follow Landing Gear Leg for 1998 Fleetwood Savanna 5th Wheel
- Article: RV Winterization Guide: Step-by-Step Process from the Pros
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: 7 Facts About RV Antifreeze Every RVer Should Know
- Article: How to Measure for Motorhome Steps
- Article: How to Mount a Truck Bed Camper
- Article: Trailer Wiring Diagrams
Brianna Q.
7/8/2020
Would RVLG-8000 work for replacement on our 2010 Keystone Laredo 321BH? The current leg shaft is 29.5" in length. Standard 15.5" between brackets. 62.5" horizontal distance between the legs.