Wiring Adapter for Tekonsha Brake Controller in 2017 Toyota Tundra

Question

Question:

K bought a p3004 wire but its the wrong one. Any suggestions

asked by: Sam S

0

Expert Reply:

The correct wiring adapter for your 2017 Toyota Tundra and a Tekonsha brake controller is the Tekonsha Custom Wiring Adapter # 3031-P which will work with your truck and brake controllers such as the Prodigy P3 # 90195, Prodigy P2 # 90885.

expert reply by: Kyle S

0

Answer 1

The #30717 is exactly what you're looking for as long as you don't need the 7-way to supply anything other than lights on the trailer. You just plug the 4-ways together, connect the white ground wire to the vehicle's frame using the…

view full answer...

Answer 2

You will need to start with a 4-way (if you do not have one). For that you would want the #118405. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller…

view full answer...

Answer 3

The Tekonsha Prodigy P2 controller, part #90885 and our Brake Controller Installation Kit, part #ETBC7 are exactly what's needed to install a brake controller on your vehicle. If your FJ Cruiser already has a functional 4-pole connector,…

view full answer...

Answer 4

Yes, we have a 7-way trailer wiring harness for you that uses the existing 4-way trailer connector and we have a brake controller that does not require you to splice into the stop light switch circuit. For this, I recommend using the Curt Universal…

view full answer...

Answer 5

Directions? Pffft! We'll do you one better....How about an install video? Take a look at the link I provided, you can see our technicians installing a different brake controller on a 2013 FJ Cruiser. Even though the model year is different and…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Wiring Adapter for Tekonsha Brake Controller in 2017 Toyota Tundra

Featured Help Information

Miscellaneous Media

Continue Researching