Replacement Motor for Lippert Stabilizer Jack Part Number 198641

Question

Question:

What is the the part# for just the motor for lci 198641

asked by: Charlie

0

Expert Reply:

The Lippert Components High-Speed Power Stabilizer Jack - 30" Lift # LC298707 is the updated version of the 198641 you have. We have the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks # LC138445 for your stabilizer.

expert reply by: Jason S

0

Richard

7/28/2025

Thanks so much Jason

Jameson C.

7/28/2025

@Richard Glad Jason could help!

Answer 1

Hey Jeff, so we do have the replacement motor for your 198641 setup with the part #LC138445 which is possibly your problem but I would check with a circuit tester liker part #PTW2993 to see if voltage is getting to the motor when the switches are…

view full answer...

Answer 2

The Lippert Components Power Stabilizer Trailer Jack #LC298707 that you referenced will work as a replacement for your 198641 stabilizer jack. If you use the Linc Analog Remote #LC292614 for your RV then this is compatible with that as well. The part…

view full answer...

Answer 3

I have attached a parts breakdown of the Lippert Components Power Stabilizer Jack but I am not sure which roll pin you are referring to. That said, it should like the shear pin may have been damaged so in which case you would need to replace the…

view full answer...

Answer 4

Yes, based on my research the Optronics Lens #AST60B is indeed the correct replacement for your existing AS2T216 model assembly. To be extra sure you can also quickly compare the dimensions of your current lens to this replacement, which measures…

view full answer...

Answer 5

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

view full answer...

Answer 6

In regards to the Lippert Components High-Speed Power Stabilizer Jack like part #LC298707, the first thing I would do is check voltage on your battery to make sure it is above 12.4 volts. If it is not then you have a dead battery and it will need to…

view full answer...

Answer 7

Thanks for the photo, and I searched but could not find anything with the numbers on the sticker. Truly, the only way to know which is the correct replacement is to know the model of your Lippert stabilizer jack. There are only a couple that are…

view full answer...

Answer 8

I have a solution for you, but the Lippert 198641 jack that you mentioned has been discontinued, and parts are no longer available. You will need to replace your old jack, which can be done with the Lippert Components High-Speed Power Stabilizer Jack…

view full answer...

Answer 9

The Lippert High-Speed Power Stabilizer Jack #LC298707 would be a great replacement option for your Lippert 198641 stabilizer jack. The motor #LC352338 for the #LC298707 hasn't been tested with the 198641 so it's not confirmed to fit.

view full answer...

Answer 10

I was able to cross-reference your part number and the C-800 Replacement Klauber Motor for Standard Lippert Components Electric Stabilizer Jacks #LC138445 is the updated motor for your trailer jack. It will be a direct replacement.

view full answer...

Answer 11

The powered stabilizer jack set you'd need to replace the 198641 is the part #LC298707 as the number you have now has been discontinued but the #LC298707 is basically the current version of what you already have so it will fit and work great as a…

view full answer...

Answer 12

I checked with the manufacturer for you, and they say that the Solera Awnings are slower when they retract. If you are sure there are 12 volts by testing with a multimeter the next thing to do is ensure the pitch arms aren't bent at all, which…

view full answer...

Replacement Motor for Lippert Stabilizer Jack Part Number 198641

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching