Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the Linc analog remote for your 5 channel Linc receiver system on your RV. Can be used to upgrade your existing system to have a remote control. Control up to 5 power features with this remote.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're gonna take a quick look at this Replacement New Style Linc Analog Remote. This is going to replace the New Style Linc Analog Remote for your five channel Linc receiver system on your Lippert RV. This is going to work as a replacement for your 2012 or 2013 fifth wheels and trailers. And this can also be used to upgrade your existing system to have a remote control. And this five channel transmitter is going to control your slide outs, your awnings, your lights and leveling or stabilizer jacks.
And this does have a transmission range from 30 feet all the way up to 50 feet. And this is going to be ready to use right out of the box. Batteries are included. And I went ahead and just turned the power button on. I don't know if you can see the green lights there indicating that we have power.
Let me turn my studio lights off there real quick so you can see it's ready to be programmed. And so this is gonna be ready to go for you. We do provide an instruction link on this product page to walk you through the programming process. So if you're looking to replace the New Style Linc Analog Remote for your five channel Linc receiver system on your Lippert RV, this is going to be exactly what you need. Well, that's going to conclude our look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Battery still dies frequently, even when turned off. Also, no matter how hard I try I can program it correctly. When you press up it goes down, press out it goes in. It works its just backwards. I’m sure the programing is my issue. Other than that it works as it should.
All is good the only problem was finding the receiver in the camper to pair to.
Pure junk, first one arrived with corroded batteries. Second one works after I replaced the cheap no name batteries that came in it but the functions are reversed. Functions do not match the name on the buttons.
Programming instructions are very limited I got it to work but not like it should the awning function moves the slide one of the jack functions moves the awning I tried to start over but was unable to
Brooke M.
3/13/2024
I asked the manufacturer about this. Here is what Tyler at Lippert had to say: What I would recommend is going into the programming mode again, once in there write down what you program to what function. So if it blinks once set that to awning and right down Function one Awning. Then if the awning moves the slide out or a jack you know for the second go around function one should be the jack. Let me know how it goes!
I did not find it easy to program to my 2011 Cougar. It works but the pre-sets are not the same as what actually happens. I.E. the awning is actually the front leg control, and the rear stabilizers are the main slide out.
Can’t get it to pair with my rv
Brooke M.
7/16/2024
It looks like in your case the remote was defective, but in a normal troubleshooting scenario, its best to check the batteries and make sure they arent dead, and then wed go from there. Thanks for reaching out!
The first temote I received had corroded batteries, now I have the replacement and it won't sync with my trailer receiver.
I would like the remote to be returned and my money back.
I was reminded about getting one for "back-up"...while they're still available. From a "Montana Owners" website. Handiest device we have on our 2013 3402RL! Use it daily while travelling/camping for setup/hookup/takedowns etc. Glad it was still on the market! Amazed on how fast it was delivered!
Richard
3/9/2024
Still very satisfied, glad I have this second backup for our 5vr.
I was stranded at the campground with 1 slide out extended and 1 retracted so that I couldn’t leave or get to my inside refrigerator. One call to etrailer and they made sure I was ordering the correct item and that it was in stock, shipped overnight and it promptly arrived the next day and I was on my way!
Exact Replacement, fast shipping.
The service from KATE F was excelent she was very helpful and followed up after the procduct was delivered. The remote its self is hard to program and to use as it works backwards. We are trying to make it work.
Just what I needed. Excellent customer service help.
great product and tech support people, thank you for your help...
It wasn’t as advertised.didn’t work for my application
Jenny N.
11/17/2021
I will have our customer service team reach out to you.
Everything was great got it in time like you said.
Do you have a question about this Accessories and Part?
Condition: Missing Parts
Notes: Item is missing batteries, otherwise like new condition.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
9/29/2025
I am glad it is working, even if it is backwards. From what I can find on that issue it is most likely a wiring issue. I would first try to re-sync the remote to make sure that is not the issue. Just disconnect the power for 10-15 minutes and then re pair the remote. If that does not fix the issue, then you will need to access the receiver board, locate the wires for the functions that are acting in reverse and then swap the positive and negative wires and get those functions back to working normal.