Mechanism that Holds Philips Door Slider Closed all the Time

Question

Question:

My slider is still intact....I just need the bracket it nestles into when its closed. Is that sold separately? Or all together?

asked by: Matt D

1

Helpful Expert Reply:

What you are looking for is the Replacement Handle for P-Series RV Screen Doors # A77027. This is the broken piece I see in the picture you attached and is the mechanism that holds the slide fully closed. This fits the Philips brand that you said you have as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

I believe you're looking for our 2" x 10" floor registers that come in the following colors: Black - #37202-29135 White - #37202-28905 Brown - #37202-28915 Overall these measure 11-1/2" x 3-3/4" but the part that inserts into…

view full answer...

Answer 2

The screen door slide you selected, Valterra #A77022, and all other options are shown on the linked page. In the specific size of this slide, 11-11/16 x 11-7/8-inches, all items are from Valterra and will have the same thickness dimension. Lippert 12…

view full answer...

Answer 3

You simply measure between the tires about an inch off the ground to determine what Fastway chocks are the best fit for your application. We have the Fastway ONEstep Wheel Chock for Tandem-Axle Trailers and RVs - 16" to 24" Long…

view full answer...

Answer 4

Normally the SAE number isn't a reliable way to find the correct replacement as it is not a part number, but from different customers in the past we've determined that the number you listed is for the Bargman Light Lens #34-59-010. This lens…

view full answer...

Answer 5

Sorry about your lenses being damaged. The good news is that replacement lenses are available for the Fender Clearance Light, part #BA44FNL. The amber lens is part #A44AB, the red lens is part #A44RB.

view full answer...

Answer 6

For a gasket you could use with a roof vent that uses the lid part #BV0554-01 you'd want the part #BVD0455-01.

view full answer...

Answer 7

I believe this seal was 3/8" wide when initially installed an over time it has been stretched. As long as you have one of these models: the Ventline Ventadome roof vent models manufactured after 2008, V2092, V2110, V2094, V2119, and V2128, it…

view full answer...

Answer 8

I would start off by trying to secure the corners of the Replacement Dome Seal, #BVD0455-01, using a silicone sealant like the TremPro 644 Silicone Sealant, #0160297. I am unsure if trimming the corners will help.

view full answer...

Answer 9

The SAE numbers are not always super reliable and is not always the best information to go off of when finding a new replacement lens. Instead, I recommend measuring your current lens and take note of its shape/color and let me know. From here,…

view full answer...

Answer 10

The lips on the Replacement Dome Seal #BVD0455-01 will face out and up, respectively. You can see it fairly well in the picture I have included.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Mechanism that Holds Philips Door Slider Closed all the Time

Products Featured in This Question

Continue Researching