Dimensions of the Brophy Trailer Stake Pocket Spare Tire Carrier # SPTC

Question

Question:

What are the dimensions of this spare tire stake pocket mount? How far out is the mounting plate from the stake pocket?

asked by: Brandon B

0

Expert Reply:

Attached are some photos I made with the dimensions of the Brophy Trailer Stake Pocket Spare Tire Carrier # SPTC. From the edge of the part that fits in your stake pocket to the back end of the carrier measured 6-1/2" as you can see in the first picture.

expert reply by: Jon G

0

click to enlarge

Answer 1

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 2

Yes, the Demco Trailer Stake Pocket Spare Tire Carrier #DM15850-76 that you referenced can carry an 8 lug spare wheel/tire.

view full answer...

Answer 3

The Demco stake pocket spare tire carrier won't work with rub rail as the bolts are not long enough. Something that can work is the Brophy Trailer Stake Pocket Spare Tire Carrier #SPTC. This uses a bolt plate and nut that secures the carrier to…

view full answer...

Answer 4

The mounting plate/channel for the Brophy #SPTC Stake Pocket Spare Mount is installed with the flat part facing up and the channel part facing down. I have attached a demonstration video showing the orientation.

view full answer...

Answer 5

I recommend the Tamarack ST235/80R16 Radial Trailer Tire w/ 16" Silver Mod Wheel #LHACK133 as a spare. This will include the Wheel #MX59FR you are looking at with a Tire #LHCK401 already mounted. The reason you see so many different weights is…

view full answer...

Answer 6

I have a solution for you but you're going to have to make sure you can bolt this tire carrier near the edge of your trailer. It is the Demco Spare Tire Carrier for up to 4" Trailer Tongue item #DM15851-76. The height to the center of the…

view full answer...

Answer 7

Yes, the Brophy Trailer Stake Pocket Spare Tire Carrier #SPTC will fit your 3-1/2" x 1-3/4" stake pockets. I went out to the warehouse and verified that inserts into the stake pockets measures 3-1/2" x 1-9/16". This is almost…

view full answer...

Answer 8

I checked out your trailer and since it has stake pockets on the side the best spare mount for an 8 lug wheel would be the part #SPTC which fits 8 lug wheels and also into stake pockets.

view full answer...

Answer 9

The Provider ST235/85R16 Radial Trailer Tire w/ 16" Vesper Silver Mod Wheel - 8 on 6-1/2 - LR G #TA26FR you mentioned has a load rating of 4400lbs at 110 PSI, and assuming that your trailer has tandem axles this would give you a combined load…

view full answer...

Answer 10

Yes, the Brophy Trailer Stake Pocket Spare Tire Carrier #SPTC does include 2 bolts and 2 coned lug nuts to secure the spare tire to the 7-1/2 x 6-inch tire mounting plate. It also includes a longer bolt and u-channel steel brace to secure the entire…

view full answer...

Answer 11

Absolutely. I recommend the Westlake ST225/75R15 Radial Trailer Tire w/ 15" Silver Mod Wheel - 6 on 5-1/2 - Load Range E #LHAW124. This combination is rated for 2,830 lbs at 80 psi and has a max speed rating of 75 mph. This company has the best…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Dimensions of the Brophy Trailer Stake Pocket Spare Tire Carrier # SPTC

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching