Wheel Recommendation to Fit Tire Size 16x6.50-8

Question

Question:

I’m looking for a rim that fits a 16x6.50-8 tire. It needs to be a 4 lug with 1/2” studs

asked by: Mark J

0

Expert Reply:

The size rim you need is 8 inch in diameter and 5-3/8 inch wide like the part # AM20011 which would fit and work well. It also has the 4 on 4 inch bolt pattern you need too.

expert reply by: Jameson C

0

click to enlarge

Answer 1

In regards to a 5.70-8 tire, the 5.70 represents the width of the tire which is 5.7" wide and the 8 represents the diameter of the wheel the tire is designed to fit which is 8" diameter. If you are needing a replacement, the Kenda K353 Bias…

view full answer...

Answer 2

The Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C #AM3H200 uses the Americana #AM20011 wheel which has a zero offset. This will split the width in half, so once you account for the thickness of the mounting plate,…

view full answer...

Answer 3

Based on your tire size of 4.80-8 you actually need 8 inch trailer wheel and tires. Like the part #AM30000 for if you need a wheel and tire or part #AM20011 for if you only need the wheel. Most likely you measured the wheel from lip to lip which will…

view full answer...

Answer 4

With trailer tires you need to run them at the max PSI listed on the sidewall to ensure you get the full capacity of the tire and to prevent heat build up in them. For the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range…

view full answer...

Answer 5

I do have a solution, but wheels with a 4 x 3.75 bolt pattern are not available. You may be able to find some wheels that match at a junk yard but nobody makes them anymore. That being said, I recommend switching the hubs on your trailer to hubs with…

view full answer...

Answer 6

My research into the Cushman Truckster utility vehicle suggests this came with 4-lug wheels that were indeed fitted with 5.70-8 size tires. Such wheels and tires are displayed on the page I linked for you. I also linked a helpful article on trailer…

view full answer...

Answer 7

For your 20x10-8 size tire, you can use an 8 inch x 7 inch wheel like the Americana #AM20021 if you have a 4 on 4 inch bolt pattern or #AM20026 if you have a 5 on 4-1/2 inch bolt pattern. Both wheels feature a nice white powder coat to resist…

view full answer...

Answer 8

I have a solution for you. However, you are going to need a little more information to make sure you receive the correct hubs to replace you current oil bath hubs. You will need the bearing numbers of your current hub to match with the replacement…

view full answer...

Answer 9

Trailer rims/wheels can often accept more than one single tire size but this is not always the case, especially with the smaller wheel sizes like an 8-incher. Tire size 4.80/4.00-8 only fits on one specific rim size, one that is 3-3/4-inches wide and…

view full answer...

Answer 10

We have just what you need. The part #AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern. If instead you need a 5 on 4-1/2 inch bolt pattern you would want the part #AM3H240.

view full answer...

Answer 11

First, I can tell you that we carry few rims that have an offset. If it did have an offset it would be listed so it looks like the Dexstar Wheel, #AM20021, has a zero offset. Given that it has a zero offset the total width of the rim is 8 inches (7…

view full answer...

Answer 12

The Americana 8 x 5-3/8 Steel Trailer Wheel #AM20011 that you referenced does not offer any offset. This particular wheel can accept one tire size, 165/65-8, and the tire of this size we offer is part #AM1HP22. This item is a load range C-rated bias…

view full answer...

Wheel Recommendation to Fit Tire Size 16x6.50-8

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching