Recommended Safety Chain Loops for Reese 20K Goose Box Chains on a 2012 Ford F-450

Question

Question:

For my 2012 Ford F450, which safety chain loops will fit the large clevis hooks on the 20,000# Reese safety chains part #RP49151? Thanks!

asked by: Holger F

0

Expert Reply:

It sounds like you have the OEM pucks on your 2012 Ford F-450. If this is the case then I recommend using the safety chain loops # RP58468 which I confirmed with my contact at Reese will work with the Reese Safety Chain Kit # RP49151 for your Goose Box.

If you don't already have a gooseneck ball then I recommend going with the kit # RP30137 instead which comes with the hitch ball, safety chain loops, a storage bag, and a cover for the center puck location.

expert reply by: Jon G

0

click to enlarge

Answer 1

We do have just the safety chain loops for the Ford factory fifth wheel rail kits like you have. For that you'd want the part #RP58468 and you'd be set.

view full answer...

Answer 2

For a 3" gooseneck hitch ball that is compatible with the OEM puck system on your 2017 Ford F-350 Super Duty we have the Reese Pop-In Ball #RP19314 which has a 30K weight capacity. For the safety chain loops you can use part #RP58468.…

view full answer...

Answer 3

Joe, the WS Aero Hitch 6" Drop Hitch w/ 2" Shank #WS67MR is available with a 4" #WS54UR, 10" #WS42RR, and 8" #WS45RR drop length.

view full answer...

Answer 4

You actually have a couple of options to add safety chain loops to the factory 5th wheel prep package on the 2011 and newer Ford trucks. First, #RP58468 does fit but you could also use #C60691. The Reese ones #RP58468 measure 2 inches by 1-3/8 inches…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Thomas! The distance from the center of the hitch pin hole to the center of the ball on the #BW77BR is 13-5/8". This is designed to fit a 2-1/2" receiver with a 10k rating for the 2" and 21k rating for the 2-5/16" ball. What…

view full answer...

Recommended Safety Chain Loops for Reese 20K Goose Box Chains on a 2012 Ford F-450

Featured Help Information

Miscellaneous Media

Continue Researching