Recommended Economical Winch Car Trailer

Question

Question:

Economical hand or electric winch - I need a winch to load my 2400lb. 31 Ford pickup on my car hauler in case of breakdown preventing me from driving it on. This is for emergency use only. The trailer ramp is 53” long and the trailer floor is 20 inches high 22 degrees

asked by: Gilbert P

0

Expert Reply:

A great option for an economical electric winch for your car hauler to pull your 2,400 lb Ford in case of emergency is the Bulldog Winch Trailer Winch # BDW15017 because its compact design won't take up much room, it has a load-holding brake, free-spooling clutch and attached remote control for ease of use. It is also going to be highly durable due to its powder-coated steel body, steel mounting plate and zinc-plated wire rope.

The Bulldog Winch # BDW15017 has a 1.5-horsepower, 12-volt DC motor and has a line pull rating of 3,400 lbs.

I have added links to video reviews of this winch for you to check out as well.

expert reply by: Kyle S

0

Answer 1

The Bulldog Winch Trailer Winch #BDW15017 actually comes with its own mounting bracket. The problem is that since you secure the winch by threading the bolts through the bottom of the bracket to the bottom of the winch you would have to permanently…

view full answer...

Answer 2

An electric winch is typically powered by either a battery mounted on the trailer or the vehicle batteries. Electric winches will have power leads coming from the winch that will attach to the positive and negative posts on a 12 volt battery (see…

view full answer...

Answer 3

To wire up the Bulldog Winch 1.5 hp Trailer Winch part #BDW15017 to your tow vehicle you would want the part #BDW20026. This will give you 24 feet of 3 gauge wire that you will run up to the vehicle battery and also includes quick disconnects for the…

view full answer...

Answer 4

The Bulldog Winch #BDW15017 does not come with a mounting kit but does have a mounting bolt hole pattern that is 2.99" x 4.8" on center. You can use this to help you find the appropriate mounting location. This winch actually runs off of DC…

view full answer...

Answer 5

The best option for loading your Austin-Healey Sprite onto your trailer would be an electric winch, the Bulldog Trailer Winch #BDW15017. This winch can be mounted via the plate that is included, and has more than enough power with its 3,400 lbs…

view full answer...

Answer 6

Since your race car is a rolling load the Bulldog 1.5 hp Trailer/Utility Winch w/ Mounting Plate #BDW15017 that you referenced would have more than enough capacity. Even if the ramp angle on your trailer was very severe this winch would easily work…

view full answer...

Answer 7

The Superwinch LT2000 Electric Utility Winch, #1120210, will need to be wired directly to the battery. You are correct the smaller gauge wire on the 7-Way plug will not be sufficient enough to handle the current of the winch. Two of the wires on the…

view full answer...

Answer 8

Lets start with the wiring connector for your 2003 Ford F-150. With a look under your truck we can determine if the 4-Way flat on your truck is a factory plug or not. If the 4-Way connector is a factory connector, the wiring harness will be connected…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Economical Winch Car Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching