Replacement Bearings for a 2007 Weekend Warrior SuperLite FS2500

Updated 01/15/2019 | Published 01/14/2019

Products Featured in This Question

etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K

(3193)

$183.57

Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased

(1287)

$162.65

Question:

i have a 2007 FS2500 WEEKEND WARRIOR and wanted to know which size of bearing and race i would need so when i replace my brakes i could install new bearing. i just order 2 set of brakes from etrailer. thanks for time

asked by: Jimmy

Expert Reply:

I really wish I knew exactly what size bearings your trailer has but trailer manufacturers do not provide us with this information. However, if the Electric Trailer Brake Kit part # AKEBRK-7-SA that you purchased is correct then the most likely hub/drum to pair with these brakes is the Trailer Hub and Drum Assembly part # AKHD-655-6-K which uses a 25580 inner and a 15123 outer bearing. In order to be certain this is the correct hub/drum for you, you can either pull the hubs you have now and read the bearing numbers, measure them with a digital caliper, or call the trailer manufacturer with your VIN.

If you choose to pull the hub and read/measure the bearings then you will want to take a look at the help article I have attached for you first.

expert reply by: Conner L