Fit Kit Needed for Thule Square Bar Roof Rack on a 2015 Lexus CT 200h

Question

Question:

What fit kit do I need for the TH460R Thule Podium Roof Mounted Foot Pack for Square Load Bars? I have a 2015 Lexus CT, which means no existing rails or crossbars. The Thule website says KIT1426, but it says it only works on 480 foot pack, and I have the 460 foot pack?? Let me know, thanks!

asked by: Torr L

0

Expert Reply:

If you already have the 47" Thule SquareBars # TH712200 then the only other parts you need to complete the roof rack for your 2015 Lexus CT 200h are the Traverse Foot Pack # TH480R and the Fit Kit # THKIT1636.

Since your CT 200h doesn't have pre-installed fixpoints for a roof rack you actually need to use the Thule Traverse Roof-Rack Foot Pack # TH480R. The Thule Podium Roof Mounted Foot Pack # TH460 is designed to work with vehicles that have the pre-installed fixpoints so it won't work for your application unfortunately.

The Thule Fit Kit # THKIT1426 that you references only fits 2006 - 2013 Lexus IS 250, IS F-4, and IS 350 Sedan models so it isn't compatible with your CT either.

expert reply by: Jon G

0

Answer 1

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...

Answer 2

To replace the latch on the Yakima SkyBox 18 Rooftop Cargo Box item #Y07336 you will want the Replacement SuperLatch Handles for Yakima SkyBox Cargo Boxes item #Y8880348. This comes with two latches so that you can replace both and have matching lock…

view full answer...

Answer 3

So that they don't have to translate their instructions into several languages Yakima makes all of their install instructions diagrams as the visual is a "universal" language. Let's see if I can help though. I attached the picture…

view full answer...

Answer 4

The correct replacement handles for a Yakima SkyBox made from 2009 on is the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes #Y8880348. These come in a quantity of two with lock cores and keys, so you have the right…

view full answer...

Answer 5

The base clip you need for your 2010 Toyota Prius with the Thule Traverse foot pack is KIT1566. This was discontinued and replaced by their updated fit kit though which fits the new Evo system Thule came out with a few years back. If you're…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Fit Kit Needed for Thule Square Bar Roof Rack on a 2015 Lexus CT 200h

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching