Picture of Curt Hitch # C13155 Installed

Question

Question:

I have been pondering purchasing a hitch for my 2013 GLK 250 Bluetec and came across this hitch from Curt. My main concern is it not hanging too low once it is installed. Any chance we can get some customer images of this hitch installed on a GLK 250? Thank you

asked by: Peter R

0

Expert Reply:

I checked with Curt and was able to get an install picture that shows the Curt hitch # C13155 installed on a similar Mercedes as your 2013 GLK 250.

expert reply by: Jameson C

0

click to enlarge

Answer 1

There really isn't much drilling required to install the Curt hitch part #C13155 that you referenced on your 2015 Mercedes GLK 250. If you check out the picture I took from the install instructions you can see the section (with pictures) that…

view full answer...

Answer 2

There is one trailer hitch that fits the 2015 Mercedes GLK250. It is Curt trailer hitch #C13155. But this hitch does require drilling for installation. There aren't any no-drill options. I have included a link to the instructions so you can see…

view full answer...

Answer 3

The hitch your referred to is confirmed to fit a 2013 and a 2014 Mercedes-Benz GLK25 Diesel. If you check out the instruction link, you can see the instructions specific to the GLK250 Bluetec (Diesel). Curt classifies their hitch installations as…

view full answer...

Answer 4

The two hitches you referenced for the 2013 Mercedes Benz GLK are very similar but have different applications. The part #C13155 is the correct hitch for the GLK250 whereas the #C13177 is for the GLK350. While these hitches look very similar you will…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Picture of Curt Hitch # C13155 Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching