Recommended 7,000 lb Axle with Brakes for M105 Military Trailer
Updated 10/31/2018 | Published 10/30/2018 >
Products Featured in This Question
Question:
What axle kit with highest weight rating and electric brakes do you have that would be a direct swap with the stock axle on these trailers?
asked by: Eric P
Expert Reply:
To replace the axles on your M105 Trailer, you will need to know what dimension is the better fit. We have 7,000 lbs axle with electric brakes and drum assemblies that are 95 inches from hub face to hub face with 80 inch on center spring seats or 94 inch with 79 inch centers. We also have straight no drop or 4 inch drop axles.
Here are your options:
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" # 8327834-EB
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 94" # 8327864-EB
Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 94" # 8327872-EB
Dexter Trailer Axle w/ Electric Brakes - 4" Drop - E-Z Lube - 8 on 6-1/2 - 95" # 8327860-EB
If you don't already have the wiring for the electric brakes, then I recommend wire # 10-2-1 sold by the foot to connect these assemblies to a 7-way trailer connector. To make your connections clean, I recommend the 7-Way Molded Trailer Plug with Junction Box # HS381-9000 which will give you clean protected connections and a molded trailer plug that will connect to your vehicle. For the 10 gauge brake wire, I recommend heat shrink butt connectors # DW05745-5 on the brake assembly end and ring terminals # 44-5310A at the junction box. The junction box is coded for easy connection and future troubleshooting if needed.
If you have different dimensions, let me know and I'd be happy to assist further.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 8k bearing kit
- Search Results: bk4~150
- Shop: Dexter Bearing Kit for 7.2K - 8K Axles - Inner and Outer Bearings 02475/25580
- Search Results: diverter valve
- Search Results: red clearance light
- Search Results: 5 on 5 inch trailer hubs and drums
- Search Results: double eye spring
- Shop: Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank - Black Balls
- Shop: etrailer E Track O-Ring Tie-Down Anchor - 1,333 lbs - Qty 1
- Shop: B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch
- Shop: B&W Ball and Safety Chain Kit for Ford, GM, Chevy, and Nissan Titan XD Underbed Gooseneck Hitch
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Q&A: Recommended 5200-6000lb Axle For M105 Military Trailer Being Converted To Overland Trailer
- Q&A: Converting M105A2 Military Surplus Cargo Trailer to Electric Drum Brake Operation
- Video: Timbren Axle-Less Trailer Suspension Feature Review
- Shop: Du-Ha Truck Storage Box and Gun Case - Under Rear Seat - Black
- Search Results: trailer axles
- Q&A: Possible Axle Replacement For Linville Tandex Axle Horse Trailer With 86" Axle
- Q&A: Difference Between 205/75-15 Kenda Tires with Black Mod Wheel
- Q&A: How Much Distance Should I Have Between The Tire And The Trailer Frame?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement 10 Inch 5-on-5 Bolt Pattern Brake Drums for Old Car Trailer
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Pull Out Step For 2016 Open Range Trailer With 40 Inch Entry Height
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub




