bing tracking image

3M Wiring 44-5310A Review

content loading

Customers compare 44-5310A to these similar products




Products Featured in this Video



Review of 3M Accessories and Parts 44-5310A


Today, we're going to review part number 44-5310A. This is the 3M ring terminal for 12 to 10 gauge sized wire with a ring inside diameter of 3/16ths of an inch. These ring terminals are used for all types of electrical work where wires need fastening. This one is for use with a 10 or 12 gauge sized wire. It does have the vinyl insulation sleeve, which is yellow, and then the ring terminal, the inside diameter is 3/16ths so it is designed to fit on a stud size of 3/16ths of an inch. Basically, want to show you here, I got an example right here of a 12 gauge sized wire. What you would basically do is just side this into ...

You don't really want to have it sticking out. You could, but what I like to do is put it right there. Then, you're going to crimp, have a set of . This is a wire stripper with, down here is the crimping portion. If you just stick that in the very .. Put it right over there and then all you have to do is push down just like that.

Once you push down and hard enough, you can see that it crimps that wire to this ring terminal. You can see that you have a good connection. That's the reason I don't like to have the wire stick out too much because you don't want any of that exposed so if you just keep it under that insulation sleeve, you should be in good shape. That should do it for the review on part number 44-5310A. This is the 3M ring terminal for 12 to 10 gauge sized wire with the 3/16ths inch ring inside diameter. .


Info for this part was:

Employee Zack K
Video Edited:
Zack K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.