Replacement Lock for Voyager XL Cargo Box

Question

Question:

I need a replacement lock

asked by: Raquel

0

Expert Reply:

To replace the lock on your Pep Boys Voyager XL Cargo Box you will need the Replacement Lock Core and Key # SR03807.

If you need additional parts, you can use the hardware kit # SR05587.

expert reply by: Kyle S

0

Answer 1

You are correct, the Karrite Explorer and Sportrack Explorer are the same cargo box. We do offer a few individual replacement parts for this product like the Replacement Latch #03347 referenced in your question. I recommend the SportRack Replacement…

view full answer...

Answer 2

For starters, the vast majority of cargo boxes and replacement mounting hardware for cargo boxes will not work on factory crossbars for a Nissan Xterra as they are very large in comparison to the standard crossbar sizes that these cargo boxes and…

view full answer...

Answer 3

For your Pep Boys Voyager XL Cargo Box, you can use the: -Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock core and key, and the Replacement Lock Locator for SportRack Skyline XL Cargo Boxes #TH03808 for…

view full answer...

Answer 4

Ronald, for your Pep Boys Voyager XL using key 2872 you can use the Replacement Key for Thule Racks and Carriers #THKEYN2872 for a replacement.

view full answer...

Answer 5

The correct replacement key for the 3021 lock core on your Voyager XL Cargo Box is part #THKEYN3021. This is a replacement key for Thule and Sportrack products, which is the manufacturer of your Voyager cargo box. This will work perfectly as a…

view full answer...

Answer 6

Thule lock cores will typically have a number stamped on the face of the core of the lock; the #THKEYN083 key corresponds to locks with the "N083" or "083" on the lock face and this would be how you can determine the correct…

view full answer...

Answer 7

The Thule Atlantis 1600 uses the Thule One-Key Lock System #TH450200. This is the only replacement part for the Lock assembly which Thule offers for the Atlantis Box. Included is a master key to remove the lock cylinder, 2 keys and 2 lock cores which…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Replacement Lock for Voyager XL Cargo Box

Product Page this Question was Asked From

Continue Researching