Replacement Lock Core For a Thule Atlantis 1600 Roof Top Cargo Box

Question

Question:

need a replacement for lock for Atlantis 1600 could you give me the part number?

asked by: Luis S

0

Expert Reply:

The Thule Atlantis 1600 uses the Thule One-Key Lock System # TH450200. This is the only replacement part for the Lock assembly which Thule offers for the Atlantis Box. Included is a master key to remove the lock cylinder, 2 keys and 2 lock cores which are going to be keyed alike.

expert reply by: Bud M

0

Answer 1

I do have an option for you to use larger tires, but with only 4" clearance between the top of your 145R12 tires and the top of the fender on your 2020 Flagstaff 176LTD Pop Up Camper you are already around as tall as you can go. To be able to…

view full answer...

Answer 2

The Thule One-Key System #TH450600 are going to be the only lock parts available for your Thule Atlantis 1600 cargo box. The only other parts available for box are as follows. Replacement Slide Strip #TH05401 Replacement Quick Grip Mount Assembly…

view full answer...

Answer 3

Thule lock cores will typically have a number stamped on the face of the core of the lock; the #THKEYN083 key corresponds to locks with the "N083" or "083" on the lock face and this would be how you can determine the correct…

view full answer...

Answer 4

I'd love to get you setup with a brand new lock for your Thule Atlantis 2100, however to do that I am going to need to know what number is stamped on the lock cylinder itself. This number will correlate to a key which will allow you to lock and…

view full answer...

Answer 5

For your Pep Boys Voyager XL Cargo Box, you can use the: -Replacement Lock Core and Key for SportRack Explorer Cargo Box #SR03807 for a replacement lock core and key, and the Replacement Lock Locator for SportRack Skyline XL Cargo Boxes #TH03808 for…

view full answer...

Answer 6

To replace the lock on your Pep Boys Voyager XL Cargo Box you will need the Replacement Lock Core and Key #SR03807. If you need additional parts, you can use the hardware kit #SR05587.

view full answer...

Answer 7

We can help you out with that, Anthony. We do indeed carry that part. You'd want the Thule replacement lock cylinder, part #THLOCKN019. You'll need the change key, part #853-1251 to remove the existing lock cylinder.

view full answer...

Answer 8

It's not super common but sometimes lock cylinders can get corroded and not want to turn/unlock. What Thule has told us in the past is to direct some spray lube like WD40 into the key hole and then insert and remove the key several times to help…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Lock Core For a Thule Atlantis 1600 Roof Top Cargo Box

Product Page this Question was Asked From

Continue Researching