Replacement Coupler for Atwood Hydraulic Brake Actuating Coupler for Drum Brakes

Published 02/12/2019

Products Featured in This Question

Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs

(173)

$327.00

Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs

(48)

$336.40

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(266)

$77.94

Question:

Replacement needed. do you have the titan coupler without brake lockout. Have a new truck and dont really want to splice in the wiring

asked by: Bob

Helpful Expert Reply:

The Atwood brake actuating coupler number 61101 is no longer directly replaceable. Atwood has been bought out so I recommend replacing your actuator with the Titan Zinc-Plated Brake Actuator # T43397007K which can use # T4748800 as an electric lockout solenoid. This coupler has bolt holes that are 3 inches on center. I've attached a video to help further.

expert reply by: Jason S

Bob

2/12/2019

Replacement needed. do you have the titan coupler without brake lockout. Have a new truck and dont really want to splice in the wiring

Jason S.

2/12/2019

Sure thing. The Dexter DX7.5 Drop-N-Go # 099-175-00 which is the upgrated version of the Titan Leverlock and is almost the same coupler except it doesn't have the electric lockout. Because this doesn't have the reverse lockout it is recommended that you use free-backing brake assemblies so you don't trigger your brakes when driving in reverse.