What Specific Bolt Size And Length Are Needed To Install The Demco Brake Actuator # DM72VR?
Updated 04/12/2017 | Published 04/10/2017
Question:
I purchased a Demco Hydraulic Trailer Brake Actuator - Drum Brakes - Zinc Plated - 2inch Ball - 7,000 lbs- Item # DM72VR..The install video says Buy grade A bolts. Can you let me know the specific bolt size and length? Thanks !
asked by: Rick M
Helpful Expert Reply:
The bolts that you need to install your Demco Hydraulic Trailer Brake Actuator # DM72VR are 1/2 x 4-1/2 inch Grade 5 bolts and it is recommended to use a steel bushing on the interior of the frame to protect it from any over tightening that can damage your trailer frame. You can find these bolts at any local hardware store.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Demco DA86 Brake Actuator for Disc Brakes w/ Lockout and Solenoid - Zinc - 2" Ball - 8,600 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 8,000 lbs
- Q&A: Surge Brake Actuator Replacement Recommendation for Atwood Model 84132
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Is There Manual Lockout Available for Demco Surge Actuator part # DM72VR
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Search Results: sealed hubs
- Video: All About the Demco Hydraulic Drum Brake Assembly
- Video: Review of the Demco Hydraulic Drum Brake Assembly
- Video: Review of the Dexter Brake Actuator w/ Drop
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - Left/Right - 10" - 3.5K
- Shop: Demco Hydraulic Brake Actuator w/ Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 8K
- Video: Complete Breakdown of the Dexter Zinc-Plated Brake Actuator w/ Electric Lockout
- Q&A: What is the Correct Way to Jack Up a Boat Trailer to Change a Tire
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Where to Source Bolts to Install Demco Actuator DM72VR
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Article: The Best Boat Bumpers
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Search Results: brake actuator
- Article: Trailer Wiring Diagrams
- Search Results: dm72vr
- Search Results: coupler pins locks