Tongue Jack that Can Fit MicroSport Trailer

Question

Question:

Is there a crank tongue jack that will work on this trailer?

asked by: Becky R

0

Expert Reply:

A bolt on jack like the Round Swivel Marine Jack # MJ-1206B is compatible with the 2" wide x 3" high tongue on your Malone MicroSport trailer # MPG460XT and is going to work well for you.

expert reply by: Jameson C

0

Answer 1

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

view full answer...

Answer 2

Yes, the Round Swivel Marine Jack #MJ-1206B is compatible with the 2" wide x 3" high tongue on your Malone MicroSport trailer and is going to work well for you.

view full answer...

Answer 3

The Storage Trunk #MPG481 will not work with the LowBed MicroSport #MAL25FR as the bunks sit too low on the trailer. Instead you will want the Malone MicroSport Trailer #MPG461B2 or if you already have the LowBed you can use the Crossbar Conversion…

view full answer...

Answer 4

We have one box that fits the Malone Microsport trailers with the part #MPG481 which installs below the bars of the rack. I attached a review video and picture for you to check out as well.

view full answer...

Answer 5

I checked to see if there was conversion kit to convert your Malone high bed trailer to a low bed #MPG464-LB. I know this isn't going to be ideal, but what you can do is reuse the U-bolts from the cross bars you have now, and reattach the cross…

view full answer...

Answer 6

Hello Josh. Yes, you can install a cargo box on the crossbars of the Yakima LowRider Kayak Trailer #Y82QD. The LowRider crossbars are the Yakima HD Crossbars part #Y01159, which are 78" long, 3" wide and 1-1/2" tall. These will be…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Tongue Jack that Can Fit MicroSport Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching