Replacement Motor for Kwikee Series 32 Steps on 1996 Coachmen

Question

Question:

I have a 1996 spartan chassis Coachmen Destiny that has a kwikee step set. it has 2 steps I have attatched a photo of the tag on the steps. it gives a serial number and says it is a series 32 . The motor has a plastic gear in it that is stripped out. I looked on different websites and I am a bit confused. Can you tell me what I need to get the steps working again?

asked by: Keith C

0

Expert Reply:

For a 1996 Coachmen with the Kwikee Series 32 steps you will need the Lippert Components Kwikee Step Motor Replacement Kit For Pre-IMGL # LC379608.

Another option, and the one I recommend going with, is the Kwikee Step Motor Conversion/Upgrade Kit # LC379145 because it will give your Kwikee steps the updated style of motor, gear box and linkage.

expert reply by: Kyle S

0

click to enlarge

Ron B.

1/29/2020

Looking for a Kwikee Series 32 step motor for a 2001 Holiday Rambler Vacationer Ford F-53 chassis. Not sure of the right model of replacement step.

Jacob H.

1/30/2020

We have two different routes you can go. You can replace the whole motor, control arm and wiring with # LC379145. The other kit is going to be # LC379608 and it will include just the motor and the bracket it mounts to. I would go with the full kit because I wouldn't feel comfortable putting a new motor in with 19 year old brackets and hardware. The older arm assembly on the RV may end up causing more stress on the new motor potentially causing premature failure. What it really comes down to is the condition of the rest of the parts on the steps. If they are in great shape, you should be fine with just the motor. If the rest of the hardware doesn't look the greatest, I would go with the whole kit just so you don't have to mess with it down the road.

Answer 1

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 2

Hey Mark, To plug the unused ports on your JR Products RV LP Gas Manifold #JR65CR you'll just need the JR Products RV LP Gas Manifold Plug #JR25CR. We also offer a couple of adapters to make your connection to the ports easier: 1/2" x…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Motor for Kwikee Series 32 Steps on 1996 Coachmen

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching