Hubs for 2,500 Pound Axle with Straight 1 Inch Spindle
Published 09/13/2018
Products Featured in This Question
Question:
the # TA88545-2 is fit the straight spindle with a diameter of 1?
asked by: Bill
Expert Reply:
The Timbren Idler Hub Assembly # TA88545-2 referenced in your question is designed for 2,500 pound axles and it uses the # L44649 inner and outer bearing. This particular bearing features an inner diameter of 1.063 inches, so I highly recommend verifying the measurements you took on your spindle with a digital caliper.
If you do have 2,500 pound axles and the spindle is in fact 1 inch exactly, then the correct idler hub assembly will actually be the CE Smith # CE13210. This hub uses the # L44643 inner and outer bearing, which features an inner diameter of 1 inch to correspond to a straight 1 inch spindle. This particular hub also includes the needed bearings and seal and they are all pre-packed in marine-grade grease. It has a bolt pattern of 5 on 4-1/2 inches.
I have attached a short video demonstration that you can also check out.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Standard Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Detailed Breakdown of the Double Lip Grease Seal
- Q&A: Replacement Bearing and Seal Kit with Grease for a Malone MicroSport Trailer
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Search Results: malone crossbar
- Search Results: ce smith trailer hubs and drums
- Shop: Karrier S-Trail Radial Trailer Tire with 12" Aluminum AM01 Wheel - 5 on 4-1/2 - Load Range D
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 15 Diodes - Red Lens
- Search Results: led running lights
- Video: All About the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Video: Curt Soft Trac Trailer Breakaway Kits Replacement 12-Volt Battery Review
- Video: Malone Crossbar Conversion Kit for Standard Utility Trailer: The Breakdown
- Video: All You Need to Know About the Malone TopTier Load Bar Kit for Utility Trailers
- Q&A: Preassembled Galvanized Trailer Idler Hub w/ a 5 on 4-1/2 and L44643 Bearings
- Q&A: Should EZ Lube Spindles Have Grease Installed Through Zerk Fitting
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Q&A: Kenda K353 Bias Trailer Tire - 5.70-8 - Load Range D Life Expectancy
- Q&A: Can 12" Tires Be Mounted In Place of 8" Tires on a 1994 Coleman Pop Up Camper?
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Video: Feature Breakdown: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Search Results: l44643