Receiver Depth on EcoHitch Invisi Trailer Hitch Receiver # 306-X7257

Question

Question:

How deep is the receiver on this. I have a type of platform bike rack and there is a minimum distance it must go into the receiver. Just wanting to be sure this will work before ordering.

asked by: Matt

1

Helpful Expert Reply:

I went out to our warehouse to take a look at the EcoHitch Class III Trailer Hitch # 306-X7257 referenced in your question, which is confirmed to fit your 2015 Subaru WRX. The receiver is actually hollow but from front to back it measures exactly 4 inches. I have attached an image to assist.

expert reply by: Chris R

1

click to enlarge

Answer 1

Thanks for the picture! The EcoHitch Invisi Trailer Hitch Receiver item #306-X7257 installs behind the rear bumper cover of the 2015 - 2021 Subaru WRX. The receiver is positioned right where your third brake light sits so no you can't use it with…

view full answer...

Answer 2

Hi Greg; we do carry a hitch and wiring for your 2025 Sienna. The best hitch is the etrailer #e56RR. This has a 2" receiver, bolt-on installation, and a matte black powder coat finish. It also comes with a limited lifetime warranty. For wiring…

view full answer...

Answer 3

There is only one 2 inch trailer hitch we offer for the 2015 Subaru WRX, the EcoHitch part #306-X7257 that you referenced. None of the other manufacturers have a 2 inch hitch for this vehicle.

view full answer...

Answer 4

The best hitch for your 2018 Subaru WRX in my opinion is the EcoHitch Invisi Trailer Hitch Receiver - Class III - 2" #306-X7257. This hitch will fit right into the factory knockout panel location of your lower bumper. The rest of the hitch will…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Receiver Depth on EcoHitch Invisi Trailer Hitch Receiver # 306-X7257

Product Page this Question was Asked From

Continue Researching