How Does Thule TracRac SR Toolbox Mounting Kit Install

Question

Question:

How does the toolbox mounting kit fit on the TracRac base rail? I am looking at purchasing the TracRac SR base rails and using the toolbox mounting kit to mount a Wilderness rack to my pickup bed but I need details on how the toolbox mounting kit fits on the TracRac base rail.

asked by: Alan D

0

Expert Reply:

I attached a picture I took from the install instructions of the Toolbox Mounting Kit for Thule TracRac SR # TH25200 that you referenced that shows how it installs relative to a TracRac SR ladder rack.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Since you have a TracRac System that slides for adjustable crossbar spread, I recommend the Inno Fork Lock Roof Bike Rack - Fork Mount - Channel Mounted - Aluminum #INXA391 which uses t-shaped bolts to secure the rack that will be compatible with…

view full answer...

Answer 2

The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH33JV you mentioned are for the 6-3/4' bed versions of the 2020 Chevrolet Silverado 1500. Since you mentioned having a short bed you would actually need the #TH21782 which is…

view full answer...

Answer 3

It looks like the 2008 GMC Sierra 1500's have a 6-1/2' bed so the correct part is the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks item #TH21501. The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks item…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

How Does Thule TracRac SR Toolbox Mounting Kit Install

Product Page this Question was Asked From

Continue Researching