Towing Capacity for 2016 Jeep Compass

Question

Question:

I have a 2016 altitude 4x4 Jeep Compass. Whats my tow capacity

asked by: Leonard M

0

Expert Reply:

I took a look at the online version of the owner's manual for your 2016 Jeep Compass and found that the towing capacity will range from 1,000 to 2,000 pounds depending on what the vehicle is equipped with. For example if you have the 2.0L engine the maximum trailer weight is 1,000 pounds but if you have the 2.4L engine with the trailer tow package then the maximum weight is 2,000 pounds.

I highly recommend checking your copy of the owner's manual to verify the capacity for your specific model Compass. You can also visit a local Jeep dealer with your VIN and they will be able to tell you the exact number.

Since it sounds like you will be doing some towing you will need a trailer hitch and wiring (if you do not already have them). For a trailer hitch I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75712. This Class III hitch is confirmed to fit your Jeep and will use existing holes in its frame for a no-drill installation. It will provide you with a 2 inch receiver opening perfect for use with a ball mount for towing or for other hitch-mounted accessories like bike racks and cargo carriers.

I have attached an installation video that you can use for reference.

For trailer wiring I recommend the Tekonsha T-One Vehicle Wiring Harness # 118539. This custom harness will install by plugging into factory ports behind the driver and passenger side tail lights. This will give you a 4-Way connector to connect with and power a trailer's basic signal lights. I have again attached an installation video for you to check out.

In order to tow a trailer you will also need a ball mount and hitch ball. I have attached a great article that explains how to choose the best one for your setup, along with a link that will take you to our available selection. I have also included a couple articles on towing that you might find helpful.

expert reply by: Chris R

0

Answer 1

While you are correct that we offer a couple great choices for Class III hitches for a 2022 Lexus GX 460, we cannot confirm whether hitch manufacturers are developing a design for a Class IV application. With that being said, the only current route…

view full answer...

Answer 2

From your photo, it looks like you already have a 4-pole/7-way trailer trailer connector on your Lexus GX-460 that's identical to the #HM40975 we offer. This means that if you're towing a trailer that does not have electric brakes, you're…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Towing Capacity for 2016 Jeep Compass

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching