Suspension Enhancement for Front and Rear of 2018 Ram ProMaster 3500

Question

Question:

Hi! Looking to get sumosprongs for our 20q5 dodge ram 3500 promaster van I see the rear ones, but I m unsure what we need for the front?

asked by: Kira

0

Expert Reply:

Since your 2018 Ram Promaster 3500 has coil springs in front you'd need the # CSS-1195F for the front and then for the rear # SSR-313-54 like what you referenced.

expert reply by: Jameson C

0

Answer 1

We have the Roadmaster spare tire carrier part #RM-195125 that would work great in the rear hitch of your 2018 Dodge Roadtrek Simpilcity SRT RV. This can fold down like you are looking for to allow rear cargo area access and was designed for…

view full answer...

Answer 2

For your 2021 Promaster 1500 Winnebago Solis Pocket the SumoSprings kit part #SSR-313-54 would be a great option for rear suspension enhancement that is confirmed as a fit and would provide up to 2,800 lbs of additional suspension support.

view full answer...

Answer 3

For your 2018 camper van on the Ford Transit 350HD having the dual wheel wheels I recommend installing the SumoSprings Solo Custom Helper Springs #SSR-121-54. These will help to reduce the rear end sag and increase stability around turns. The…

view full answer...

Answer 4

When we installed the SumoSprings Solo Custom Helper Springs #SSR-307-47 on a 2013 Ram 1500 we did not use the included spacer. There are really 2 factors that are going to come into play when deciding if you will need the spacer on your 2016 Ram…

view full answer...

Answer 5

Since you are loading your 2018 Ram ProMaster 2500 up to the GVWR I recommend starting off using the SumoSprings Solo Custom Helper Springs #SSR-313-54 for the rear axle. These are the heaviest duty option available which is what you need for your…

view full answer...

Answer 6

For your 2018 Ram ProMaster 2500 the SumoSprings rear suspension kit you'll need is the part #SSR-313-54. This has the most support at 2,800 lbs which will be ideal since you will be converting your setup to a camper. I'd first try it with…

view full answer...

Answer 7

For the Thule Elite Van XT, part #TH302013, Thule recommends Dekalin MS 5, SIKA 252 or Terostat MS937 glue. A 2-way tape can accomplish this, however I recommend going with one of the glues. Finding a 2-way tape that can handle that amount of weight…

view full answer...

Answer 8

So long as the wheelbase of your mountain bikes with 29 inch wheels is no more than 45-1/2 inches they will fit on the Elite XT Bike Rack for Ram ProMaster, which is the following part number: - Thule Elite Van XT 2 Bike Rack for Ram ProMaster Rear…

view full answer...

Answer 9

I spoke with Thule regarding the glue alternatives for installing the Thule Elite Van XT, part #TH302013, on a 2018 Ram ProMaster 2500. In order to mount this without glue, you will need to use bolts to keep this mounted on your ProMaster. That would…

view full answer...

Answer 10

If you are worried about the interference of your bike's handlebars when mounted on the Thule Elite Van XT 2 #TH302013 on your 2018 Ram ProMaster 3500 Van, unless your bikes have exceptionally long handlebars, your bikes will fit without…

view full answer...

Answer 11

Those four items are used to help secure the trays when they are in the up position and not carrying bikes. They are the perfect size to fit around the tubes of this bike rack.

view full answer...

Answer 12

It looks like your Winnebago Solis 59PX is built on a Ram ProMaster chassis which the Thule Elite Van XT 2 Bike Rack #TH302013 is designed to fit. Just to give you a little reassurance about fitment the brackets measure 32-5/8" long and Thule…

view full answer...

Suspension Enhancement for Front and Rear of 2018 Ram ProMaster 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching