Can Mounting Plate of Single-Speed Boat Trailer Winch be Drilled
Published 08/10/2018
Products Featured in This Question
Question:
Is it possible to drill the mounting plate and have two inline bolts? My mounting tube is 3x3. Thanks
asked by: Joe S
0
Expert Reply:
No, you should not drill the mounting plate of the Single-Speed Boat Trailer Winch with 20' Strap # 315-W1800D in order to have two inline bolts as it could compromise the integrity of the winch.
For a similar winch with a different mounting plate I recommend checking out the Dutton-Lainson Hand Winch # DL14627 which may work for you. As you can see from the accompanying photo this winch offers the ability to mount on a 3" x 3" tube.
expert reply by:
Kyle S
0
click to enlarge
Continue Researching
- Shop: Trailer Wiring
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Search Results: 7 blade to 4 pin adapter
- Q&A: Recommended Single Speed Hand Winch for Boat Trailer and 1,500lb Boat with Motor
- Q&A: Replacing a Shelby 5407B Winch Rated for 1,700 lbs
- Search Results: boat trailer parts
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
- Search Results: boat wench
- Search Results: trailer winch
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Search Results: l44649 bearing kit
- Search Results: bearing l44649 trailer bearings races seals caps
- Video: In-Depth Review of the Spindle Nut for Axles with 7/8"
- Search Results: boat trailer winch stand
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Shop: Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot
- Video: Let’s Check Out the CE Smith Bunk-Style Guide-Ons for Boat Trailers
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,600 lbs
- Q&A: Looking for a Replacement Handle for a Knott Autoflex Hand Winch
- Q&A: Recommended Adapter to Connect 7-Way Round Pin to 4-Flat Connector
- Q&A: Recommended Hardware to Install the Channel Tongue Trailer Coupler # CT-2001-Z
- Q&A: Base Dimensions of the Single-Speed Boat Trailer Winch Part # 315-W1800D
- Q&A: Replacement Recommendation for a Shelby Boat Winch Model 5407B 1700lb Manual Crank
- Video: Review of the Replacement Mounting Bolt with Nut for Adjustable Channel Couplers
- Video: Review of the Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Explore Expert Info
![Our Expert]()
on Trailer Winch
on Trailer Winch
