Recommended Single Speed Hand Winch for Boat Trailer and 1,500lb Boat with Motor
Updated 04/01/2016 | Published 03/30/2016 >
Products Featured in This Question
Question:
Can I use this with a wire cable spooled on the drum instead of rope or web? If not what winch would you recommend? Do you have 1 7/8 wide strap x 20 Do you also sell cable wire for this application: 1500# boat w/motor - want to load onto trailer and pull into position. Thanks
asked by: Joe
Expert Reply:
I do have a solution for you, but the FT18010301 hand winch you were looking at is not compatible with a wire rope.
A very similar winch that I recommend and will be compatible with a wire rope is the Dutton-Lainson # DL14627. This winch also is a single speed and is rated for 1,800lbs and 9-1/2 inch long handle. It's also designed for marine applications with its TuffPlate finish.
The wire cable for this winch is the # DL24045. The strap we recommend for this winch is the # DL24249. We don't have a 1-7/8 inch wide 20 inch long strap at this time.
The above recommended winch will work great for your boat with motor. I have linked all the above mentioned products as well as all the hand winches that fit your needs to this page for your convenience.
Product Page this Question was Asked From
Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- 1001 - 2000 lbs
- Standard Hand Crank
- Single Speed Winch
- Wire Rope
- Polyester Strap
- Dutton-Lainson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacing a Shelby 5407B Winch Rated for 1,700 lbs
- Q&A: Can Mounting Plate of Single-Speed Boat Trailer Winch be Drilled
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Search Results: boat wench
- Shop: Timken Bearing Kit, LM67048 Inner/Outer Bearings, LM67010 Inner/Outer Race, 203013 Seal
- Search Results: l44649 bearing kit
- Search Results: bearing l44649 trailer bearings races seals caps
- Video: In-Depth Review of the Spindle Nut for Axles with 7/8"
- Shop: Replacement Pad for SnapPad Jack Stand Pad System - 9" Round Jack Foot
- Shop: Spindle Nut for Axles with 7/8" - 14 Castle Nut
- Search Results: boat trailer parts
- Search Results: bow roller boat trailer parts
- Search Results: boat trailer winch stand
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: Trailer Wiring
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Video: Measuring To Choose The Right Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Video: Review of Dutton-Lainson Trailer Winch - Standard Hand Winch - DL14725
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage


