Recommended Equalizer Kit for 2 Inch Slipper Springs on Dual 9,000 lb Axle Trailer

Updated 08/08/2018 | Published 08/07/2018

Products Featured in This Question

Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 17-3/8" Long Equalizers

(197)

$288.08

Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole

(96)

$95.86

Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear

(15)

$123.79

Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing

(56)

$332.38

Question:

The question I have is about this kit my trailer has 2inch slipper springs but my trailer has 6 leaf springs the kit that Im looking at says it is for 4 leaf springs but all the measure ments are the same as mine on my trailer I have a dual tandem 9000 lb dexter axles will this kit work on it

asked by: Michael

Expert Reply:

The Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 17-3/8" Long Equalizers # HAP-205-02 will work with your tandem 9,000 lb axles. It is designed to be used in conjunction with the Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear # HAP-105-00.

The Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing # HAP-105-205-01 is also the complete kit.

If you just want the equalizer you can use the Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole # 13-117-03.

It sounds to me like you are a little confused about our description of being a system for 4 leaf springs. That is the number of slipper springs in the system, not the number of leafs in each spring stack. I hope that helps, but let me know if you have further questions.