Search: dexter trailer leaf springs   >  

Hi Bobby; I have attached a help article below which explains how to replace trailer leaf springs in 5 steps. I also attached an installation video. Between the two you should be able to install the #DX55CR without any issues. Edit: I just double…

Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here…

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the…

Yes, you can upgrade your current leaf springs with the higher rated 4,500 lb part #e27SR and you'll be fine. The suspension might be a little stiffer but you wouldn't have to worry about it going flat like what you…

Hello Mark. Based on what I could find online, the Dexter 072-042-00 is a standard 1-3/4 inch wide double eye spring which is 25-1/4 inches long and rated for 1,750 lbs. To replace these, I recommend you use the 3-Leaf Double-Eye Spring #e57SR.…

I don't have information specific to this trailer about leaf spring durability so about the only thing we can really help with here is getting you setup with the info you need to choose the correct replacements. The first bit of info…

We can definitely help! But I need you to get me the axle capacity on your trailer and the lengths of your current springs (the good ones) so that I can pick you out the best solution. Or you can check out the link I attached to this page that has…

I was able to determine your 2020 Grand Design Imagine 2970RL travel trailer will have come with 4,400lb tandem axles. Since you determined they leaf springs are 26" you will want to use the 4,500LB Springs #e27SR. The 4,000LB…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have…

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…