Search: nylon bushing   >  

Hi Nate; the backing plate is not available as a replacement part so you will need the complete brake assembly. What you have in your picture is the #LC46WD. Brakes should be replaced in pairs so for the left and right hand brake assemblies you would…

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

We have one bushing that matches the inner and outer diameters you mentioned with the part #14-67 but this is a bronze bushing and it happens to be 2-1/2 inches long.

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

I never recommend using grease with Nylon Bushings #TRBU11566. The grease can trap dirt which will cause the nylon to become damaged easier. And the chemicals in different greases can cause the nylon bushings to break down. If you want to use Grease…

The bolt part #TRFA73Z916DLNZ that you referenced is a Grade 5 bolt.

We have had a customer with your same UFP hub HD-1377 successfully use as a replacement the hub/drum #AKHD-545-35-K which works on 3500-lb axles. This hub uses inner bearing #L68149 (1.378" inner diameter) and outer bearing #L44649 (1.063"…

I will start by saying that your TDE 11033L hub uses the #L68149 inner bearing and #L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the…

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…

You can absolutely wire up a 3-wire breakaway switch like the Hopkins LED Breakaway Switch with 7" Lead Wires #HM20059 to replace your 2-wire switch; the difference is that the 3-wire switch has a dedicated ground wire while the 2-wire switch…

If you look at the photo I have edited for you, you can see all the relevant dimensions of the #115052 leaf spring shackle.