Say goodbye to ill-fitting parts! With a 1-inch inner diameter and a 2-inch outer diameter, this rubber bushing with a steel sleeve ensures a snug fit in the center bolt hole of your slipper spring. It's been the go-to solution for users like Brian and Ron, who praise its perfect fit for their applications. This precision means no more wasted time trying to find a suitable replacement.
Designed for demanding tasks, the rubber bushing with a steel sleeve is perfect for those heavy-duty Dexter axle slipper spring suspensions between 10,000-lb to 15,000-lb. Users like Mike have reported its strength holding up in challenging environments, making it the ultimate choice for trailers and equipment that require reliability and durability.
Whether you're working on a boat trailer, camper, car hauler, snowmobile trailer, or utility trailer, this bushing has you covered. Versatility was experienced by Tim, who found alternative uses such as building sway bars for agricultural sprayers. The adaptability of this bushing ensures it meets a wide array of needs.
Installing a bushing has never been easier! With a 3-inch length, it slides right into the center bolt hole of your slipper springs. Victor and others found it incredibly straightforward to replace their old ones. This user-friendly installation means you'll be back on the road in no time, focusing on your journey instead of installation woes.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the rubber bushing with the steel sleeve for slipper springs this is a quantity of one. Now this rubber bushing with the steel sleeve on the inside is designed for use with trailer suspension systems. It will replace the rubber only bushing on your slipper spring. The suspension bushing will insert in the center bolt hole of your slipper springs to ensure proper sizing for the suspension bolt. This is designed to fit the slipper spring suspension for 10,000 pound to 15,000 pound Dexter axles. You'll notice it's a rubber bushing and on the inside has the sturdy steel sleeve.
Now a few dimensions on this. We'll start with the overall length from edge to edge you're looking at three inches. Diameter from edge to edge is going to be right at two inches and the inner diameter where the bolt would go on this sleeve is one inch. And again this is for a quantity of one. But that should do it for the review on the rubber bushing with the steel sleeve for slipper spring quantity of one..
Very stronge product
Perfect fit
Thank you, Alex, the bushing's work per fectly.
i left a bad review before and i was wrong this place is great
Perfect
Great people and great company
I would definitely do business with this company again.
GREAT COMPANY TO DEAL WITH, FAST SERVICE AND THE PRODUCTS ARE ALWAYS ON SPOT. YOU GET WHAT YOU ORDER.
As described, quick shipping
Works great, will order more
IT WAS FAST TO GET WHAT YOU NEED
Arrived on time very well packaged. The exact item I need to fix trailer. Thanks good seller.
I couldn't find the proper size u boltsfor my gooseneck trailer. Found them here. Prompt delivery.
Well made, fast shipping
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.