How to Pick Out Boat Trailer Hub for TrailStar Boat Trailer
Published 08/07/2018 >
Question:
Good afternoon, I am looking for replacements for my boat trailer hubs. They are TDE 46205 if that helps any. They have 5 studs and 4.5inch as far as I can tell. Would there be a direct replacement available that a fellow could order? Any help would be appreciated.
asked by: Jeremy D
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: etrailer 2,000-lb Axle Idler Hub Assembly Install Guide - Boat Trailer
- Search Results: dexter idler hub
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda Karrier KR35 ST185/80R13 LRD Radial Trailer Tire w/ 13" Black AM03 Wheel - 5 on 4-1/2
- Q&A: How to Find Replacement Hub For Bass Tracker Pro 170 Boat Trailer
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - L44649 Bearings
- Shop: Dexter Trailer Idler Hub for 2,000-lb and 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Search Results: l44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Search Results: trailer wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Video: Hands-On with the Hub Saver Hub and Wheel Protector



