How to Find Replacement Hub For Bass Tracker Pro 170 Boat Trailer
Updated 09/21/2025 | Published 07/15/2023 >
Question:
I have a 2015 bass tracker pro 170. I would like to replace the entire hub assembly on my trailer but I am unsure of which one it takes. Any help would be appreciated
asked by: Todd R
Expert Reply:
I'm sure we can get you a hub assembly for your 2015 Bass Tracker Pro 170 boat trailer, though I could not find any information regarding what specific one this trailer requires. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them.
If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added. You will also need to know your wheel bolt pattern; if you aren't sure what your wheel bolt pattern is I have linked a help article below which details how to find it.
For example, if both of your bearings are L44649 (1.063" inner diameter) and you have a 5 on 4-1/2" bolt pattern you would use the Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 # AKIHUB-545-2-G-2K.
I have added a link below to our entire selection of hubs for you once you find this info.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: etrailer 2,000-lb Axle Idler Hub Assembly Install Guide - Boat Trailer
- Search Results: dexter idler hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized
- Shop: Kenda Karrier KR35 ST185/80R13 LRD Radial Trailer Tire w/ 13" Black AM03 Wheel - 5 on 4-1/2
- Q&A: How to Pick Out Boat Trailer Hub for TrailStar Boat Trailer
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Shop: Trailer Hub Assembly - 2,200-lb E-Z Lube Axle - 5 on 4-1/2 - 13" - 15" Wheels - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: How Much Grease is Required for Pre-Greased Trailer Hub and Drum Assembly Installation
- Search Results: trailer leaf springs
- Q&A: How to Find Replacement Bearings for Boat Trailer Hub
- Shop: Air Filter
- Q&A: How To Choose Correct Replacement Leaf Springs for a Tracker Boat Trailer
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Search Results: 175/80~13 trailer tires and wheels
- Video: Phoenix USA QuickTrim Hub Cover for Trailer Wheels: The Breakdown
- Video: Phoenix USA QuickTrim Hub Cover for Trailer Wheels Spec Review
- Search Results: 125255uc grease seal




Brett T.
9/20/2025
I own a 2017 Tahoe 1950 boat with trailer. I need a new wheel hub/drum assembly. Can you help me find the correct part?