Trailer Lights Not Working when Connected to 2008 Chevy Express 2500 w/Factory Tow Package

Question

Question:

I have factory installed 7 pin trailer plug. I only have access poer to the plug. No turn, brake , running. I checked 30 amp fuse for trailer plug and fuses user driver seat dont see any issue. Any suggestions?

asked by: Cory A

0

Expert Reply:

First we should make sure we have checked all of the fuses and relays related to the factory tow package wiring on your 2008 Chevy Express van. Under the hood there are the following fuses related to the tow package wiring:

Location 8 = right stop lamp, trailer turn signal
Location 16 = left stop lamp, trailer turn signal
Location 35 = Trailer wiring (this is a very ambiguous description and just might be the culprit)
Location 62 = Trailer wiring (see above)

Oddly enough there isn't a separate trailer running light fuse so it is either tied into one of the ambiguous "Trailer wiring" fuses or connected directly to the vehicle running light circuit.

If none of those are the issue then inspect the wiring itself as much as you are able and fix any damaged or pinched wires as needed.

expert reply by: Michael H

0

Answer 1

I can only go by what the owner's manual for your 2014 Chevy Express Van lists and on the online version I was able to pull up it shows the following fuse locations for towing circuits inside the under-hood fuse block: #3 position - Trailer Right…

view full answer...

Answer 2

While there is not a way to test the "full" scope of working properly, you can definitely ensure that it is receiving the proper power and starting the calibration process. A trailer does need to be connected in order for the LEDs to be on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Trailer Lights Not Working when Connected to 2008 Chevy Express 2500 w/Factory Tow Package

Continue Researching